Essential Guide of Bushing Tools – May 2022 Edition

Looking to find the best Bushing Tools?

We researched 29 Bushing Tools, tested 16, and we have done 10 hours of research. The best Bushing Tools doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

SaleNo. 1
OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump
  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work

Intro

Here’s your guide to choosing the best Bushing Tools. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Bushing Tools of different brands and prices based on the best value for money. This ranking was created to help you find the best Bushing Tools depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Bushing Tools that’s right for you!

Our picks

SaleNo. 1
OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump
  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
No. 2
Oni Tools Universal Freightliner Airliner/Peterbilt Low Air Leaf Pin & Suspension Bushing Remover & Installer Hydraulic Tool Kit 18 Ton Alternative to 15030 50544012
  • Direct replacement for Tools 15030 and Holland Tool 50544012 or HDL-50544012.
  • Designed to fit Automann MR656UB, MR656, MR782, MR714E, MR714 BATCO 44090 Dayton RB-268, RB-205U, RB-268, RB-205, RB-234 Dyco D046, D46, DT1155 Euclid E-8804 Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260 Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250 Gaff 11083 Hendrickson 51209, 52296 International 3538115C1 Meritor MR782 Peterbilt 52296 World America WA12-5136
  • This kit delivers 18 tons of hydraulic force for the removal and installation of the truck spring eye bushing assembly fast and easy. Made to service bushing assemblies without removing leaf spring hangers and spring assemblies from the vehicle.
  • Our set does not include a pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
  • Oni Tools ensures quality products and stands behind top of the line manufacturing. We guarantee our products to last and offer support along the way.
No. 3
DAYUAN 27pc Universal Press and Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set
  • For the removal and installation of bushes/bearing and seal etc..
  • Fully universal applications on both cars and LCV.
  • 22 Sleeves Material: 40 CR.
  • 5* pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 10 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Bushing Tools information.
As for me, I’m very familiar with the Bushing Tools since I got it from 5 years.

Top 10

SaleNo. 1
OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump
  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
No. 2
Oni Tools Universal Freightliner Airliner/Peterbilt Low Air Leaf Pin & Suspension Bushing Remover & Installer Hydraulic Tool Kit 18 Ton Alternative to 15030 50544012
  • Direct replacement for Tools 15030 and Holland Tool 50544012 or HDL-50544012.
  • Designed to fit Automann MR656UB, MR656, MR782, MR714E, MR714 BATCO 44090 Dayton RB-268, RB-205U, RB-268, RB-205, RB-234 Dyco D046, D46, DT1155 Euclid E-8804 Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260 Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250 Gaff 11083 Hendrickson 51209, 52296 International 3538115C1 Meritor MR782 Peterbilt 52296 World America WA12-5136
  • This kit delivers 18 tons of hydraulic force for the removal and installation of the truck spring eye bushing assembly fast and easy. Made to service bushing assemblies without removing leaf spring hangers and spring assemblies from the vehicle.
  • Our set does not include a pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
  • Oni Tools ensures quality products and stands behind top of the line manufacturing. We guarantee our products to last and offer support along the way.
No. 3
DAYUAN 27pc Universal Press and Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set
  • For the removal and installation of bushes/bearing and seal etc..
  • Fully universal applications on both cars and LCV.
  • 22 Sleeves Material: 40 CR.
  • 5* pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18.
No. 4
OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing
  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs; Bushing press kit saves a ton of time
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs; The OEM Tools bushing driver set includes 20 different size cups for versatile use
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings; Don’t have to remove components from vehicles with this bushing tools set
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press; Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more; Cups with bushing press and pull kit allow for hundreds of combinations
No. 5
Tiger Tool 15000 Leaf Spring Bushing Service KIT NO ADAPTERS
  • 15000 Tiger Tool Leaf Spring Pin & Bushing Service Starter Kit (No Adapters)
No. 6
SCITOO 27PCS Automotive Universal Tools Press and Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set
  • 【FUNCTION】 Designed for the removal and installation of bushes, bearings and seals. Each socket has a drilled head to locate retaining ball bearing on most breaker bars and impact wrenches to ensure a safe secure fit.
  • 【FEATURES】 The whole tool set is with fully universal application for cars, LGV or HGV. This professional pull and press sleeve kit set with 5 pulling spindles and nuts.
  • 【PACKAGE INCLUDED】 22x Press sleeves, 5x Pulling spindles and nuts.
  • 【RELIABLE】 High quality 45# Carbon steel and through strict quality inspection. Suitable for professional mechanic and personal. You can buy it with confidence.
  • 【ATTENTION】 Before purchasing this item, please double check the product details information. If you have any questions, feel free to contact us for help.
No. 7
8MILELAKE Upper Control Arm Bushing Service Set Bushing Removal Tool
  • Made to be the most reliable tools in the market today
  • For use on rear wheel drive Ford, GM and Chrysler vehicles, for use on autos only - Not designed for trucks
  • Built to exceed tool standards.
  • 11-Piece tool set for removing and installing press-in bushings
  • Allows changing the press-in bushings without removing the control arm
No. 8
DA YUAN Universal Press and Pull Sleeve Remove Install Bushes Bearings Garage Tool Kit
  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16)
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves . Any question or problem, feel free to contact us
No. 9
BTSHUB 26pc Universal Press and Pull Sleeve Kit, Bushing Installation and Removal Tool Set, Bushes Bearings Tool Kit Fit Cars LCV and HGV Engines
  • 26PCS UNIVERSAL PRESS AND PULL SLEEVE KIT - For the removal and installation of bushes/bearings and seals etc., remove and install for bearing bushes, silent bearing, hydraulic bearing, Rubber bearing
  • DURABLE MATERIAL - This tool kit is created from rugged drop forged construction and heat-treated to withstand difficult and rugged jobs, and helps the tool kit achieve high hardness and good wear resistance, which can provide a longer service lifetime
  • FITMENT - Applicable to many cars and LCV, HGV Engines
  • PACKAGE INCLUDING - 20Pieces Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4Pieces Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16)
  • EASY FOR STORAGE - Heavy-duty Storage case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place.
No. 10
Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit
116 Reviews
Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit
  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.

How we tested

We search all the field to find the best Bushing Tools and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Bushing Tools from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Bushing Tools and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Bushing Tools from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump
  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
SaleNo. 2
Shankly Bushing Removal Tool, Bushing Driver Set, 50 Piece Seal Drive Set
  • THE RIGHT SIZE: The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job.
  • COMPLETE SET: The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle. Making the Shankly wheel bearing driver set complete and effective.
  • INTERCHANGEABLE: All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly. Complete set details in description below.
  • IMPRESSIVE VARIATIONS: The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other.
  • HEAVY DUTY, ORGANIZED CASE: Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
SaleNo. 3
Alltrade Powerbuilt 648604 Kit 25 Upper Control Arm Bushing Service Tool Set for Ford, GM and Chrysler Silver
  • Made to be the most reliable tools in the market today
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • 11-Piece tool set for removing and installing press-in bushings
  • Allows changing the press-in bushings without removing the control arm
  • For use on rear wheel drive Ford, GM and Chrysler vehicles
  • For use on autos only - Not designed for trucks
  • Storage case includes usage photos
  • Built to exceed tool standards
  • Tool solutions for most all situations
  • Made to be the most reliable tools in the market today

Conclusion

This guide is here to support you in your choice of Bushing Tools and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Bushing Tools according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2022-05-29 at 09:15 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment