Looking to find the best Car Moldings?
We researched 12 Car Moldings, tested 6, and we have done 12 hours of research. The best Car Moldings doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.
The best
- MULTIPLE USES AND APPLICATIONS - Although this Body Side Molding Trim is intended for use on your doors to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
- ENOUGH INCLUDED FOR ONE VEHICLE - This 2" wide, 1/4" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
- STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
- MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
- FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean and flat location on your vehicle, you can install a Body Side Molding Trim to. Get creative and you'll be surprised at how good your vehicle can look!
Intro
Here’s your guide to choosing the best Car Moldings. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Car Moldings of different brands and prices based on the best value for money. This ranking was created to help you find the best Car Moldings depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Car Moldings that’s right for you!
Our picks
- MULTIPLE USES AND APPLICATIONS - Although this Body Side Molding Trim is intended for use on your doors to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
- ENOUGH INCLUDED FOR ONE VEHICLE - This 2" wide, 1/4" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
- STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
- MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
- FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean and flat location on your vehicle, you can install a Body Side Molding Trim to. Get creative and you'll be surprised at how good your vehicle can look!
- 【DURABLE MATERIAL】 Car Element provide stylish accents to your vehicle's exterior. Made of high quality ABS plastic, they ensure extreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance.
- 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface.
- 【FLEXIBLE & UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life.
- 【WIDE USING】 Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights.
- 【CONTACT US】 Please let us know that if you have any problem with our product, and we will respond within 24 hours.We would like that made customer 100% satisfaction .But you need to check our item’s fitment details to make sure this will fit your vehicle before ordering.
- 【Great Materials】Made of Durable Soft PVC with self-adhesive. Flexible and easy to cut for length needed.
- 【Where To Use】universal applicable on vehicle cars and household furniture surfaces.
- 【Multifunction】Great for Auto Exterior and Interior decoration. Applicable on car side body, bumper, grille, roof, window, bonnet, tailgate, side mirror, steering wheels, headlight & taillight, fender, center console, dashboard and household furniture surfaces.
- 【Easy Install】High quality self-adhesive tape on the back for easy installation. No drilling required, simple peel and stick.
- 【Shine & Bright】Color: Glossy Black, Width: 2 inch (50mm), Length: 16Ft. Great for exterior and interior decorating, Great modern look.
Why you should trust us
This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 12 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Moldings information.
As for me, I’m very familiar with the Car Moldings since I got it from 5 years.
Top 10
- MULTIPLE USES AND APPLICATIONS - Although this Body Side Molding Trim is intended for use on your doors to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
- ENOUGH INCLUDED FOR ONE VEHICLE - This 2" wide, 1/4" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
- STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
- MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
- FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean and flat location on your vehicle, you can install a Body Side Molding Trim to. Get creative and you'll be surprised at how good your vehicle can look!
- 【DURABLE MATERIAL】 Car Element provide stylish accents to your vehicle's exterior. Made of high quality ABS plastic, they ensure extreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance.
- 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface.
- 【FLEXIBLE & UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life.
- 【WIDE USING】 Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights.
- 【CONTACT US】 Please let us know that if you have any problem with our product, and we will respond within 24 hours.We would like that made customer 100% satisfaction .But you need to check our item’s fitment details to make sure this will fit your vehicle before ordering.
- 【Great Materials】Made of Durable Soft PVC with self-adhesive. Flexible and easy to cut for length needed.
- 【Where To Use】universal applicable on vehicle cars and household furniture surfaces.
- 【Multifunction】Great for Auto Exterior and Interior decoration. Applicable on car side body, bumper, grille, roof, window, bonnet, tailgate, side mirror, steering wheels, headlight & taillight, fender, center console, dashboard and household furniture surfaces.
- 【Easy Install】High quality self-adhesive tape on the back for easy installation. No drilling required, simple peel and stick.
- 【Shine & Bright】Color: Glossy Black, Width: 2 inch (50mm), Length: 16Ft. Great for exterior and interior decorating, Great modern look.
- 【Specification】The thick of our car door edge guards is 2mm(0.8'').Metal clips are wrapped in high quality PVC soft rubber.That helps to fit tightly and won't scrap your door edge paint.Fit on most of cars.((Remind of Truck/Van Owners, Please Ensure Your Door Edge Thickness Before Purchasing.)
- 【Buying Guide】It fit on any doors,hood and tailgate, if you want to use it on vertical position of the door, please buy 16Ft(5m).If you use it on both vertical position and bottom of the door, please buy 32Ft(10m). If you want to use it on vertical position and bottom of the door,hood and tailgate, please buy 48Ft(15m)
- 【Product Function】Anti-collision and crash-proof prevent off paint Effective, sound insulation,elegant appearance
- 【Easy Installation】Metal clips are inside soft rubber and sectional arbitrary bending design help install easily, do not need any glue, just press and would fit tightly. Your car door is very clean when you take it off,no any adhesive.
- 【Warranty】We carry 5 years warranty becaseu we use high quality rubber that Waterproof, Isolator Noise, Corrosion Resistance, High Temperature Resistance, Wear Resistance, Anti-Aging, UV Resistance.
- High Quality: Made from premium ABS plastic, chrome finish and self adhesive tape attached, with good strength and corrosion resistance, 100% durability and brand new.
- Specification: 25mm width x 12.2m length (1" x 40Feet), enough long to meet your need.
- Protect Trim: Professionally designed for protecting the sides of your vehicle from scratching and shocking and adding a bit of style to its look, Great for interior and exterior decorating
- Suitable for: The protect sticker is flexible and easy to cut for any sizes needed, suitable for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights.
- Easy Installation: Adhesive tape on the back for easy installation, Note: Please ensure that applicable place on the vehicle is clean and dry to achieve best adhesion.
- Protect the window and door, reduce wear on window/door while open and close.
- Perfect for doors and window frames.
- Easy to cut and easy to install, no requires specialist tool.
- Preventing dust collection between sliding doors or windows.
- It is widely used in the car before and after the windshield, doors, windows, launch cabin, trunk and other body parts.
- MULTIPLE USES AND APPLICATIONS - Although this Body Side Molding Trim is intended for use on your doors to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
- ENOUGH INCLUDED FOR ONE VEHICLE - This 1" wide, 1/4" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
- STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
- MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
- FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean and flat location on your vehicle, you can install a Body Side Molding Trim to. Get creative and you'll be surprised at how good your vehicle can look!
- GM CHEVY CHEVROLET (Author)
- English (Publication Language)
- 160 Pages - 08/19/2022 (Publication Date) - GM CHEVY CHEVROLET (Publisher)
- 【Great Materials】Made of Durable Soft PVC with self-adhesive. Flexible and easy to cut for length needed.
- 【Where To Use】universal applicable on vehicle cars and household furniture surfaces.
- 【Multifunction】Great for Auto Exterior and Interior decoration. Applicable on car side body, bumper, grille, roof, window, bonnet, tailgate, side mirror, steering wheels, headlight & taillight, fender, center console, dashboard and household furniture surfaces.
- 【Easy Install】High quality self-adhesive tape on the back for easy installation. No drilling required, simple peel and stick.
- 【Shine & Bright】Color: Chrome silver, Width: 2 inch (50mm), Length: 16Ft. Great for exterior and interior decorating, Great modern look.
- 【DURABLE MATERIAL】Car Element provide stylish accents to your vehicle's exterior. Made of high quality ABS plastic, they ensure extreme durability. The majority of automotive add-ons are manufactured from ABS plastic since it is well known for its strength, high durability and corrosion resistance .
- 【FLEXIBLE & UV RESISTANCE】They are made to provide superior protection to the sides of your vehicle and add a bit of style to its look. The moldings can be trimmed or cut to the desired length and are very easy to apply. Furthermore, they are flexible around body lines and UV protected for a long-lasting service life .
- 【WIDE USING】Great for interior and exterior decorating can be used on body or bumper to protect edge from scratching and shocking.Excellent Fit for trimming along car body side, door window edge, bumper, front grille, car hood, side mirror, headlights, tail lamp, fog lights .
- 【EASY TO INSTALL】Coated with glossy chrome finish, they will be a perfect addition to your vehicle's chrome trim. The installation process is quick and takes less than five minutes as neither cutting nor drilling is required.Will make the car more elegant and attractive without causing any damage to the surface.(✔Note: There is a BLUE or CLEAR film cover of the product for protective. Please removal this film before using.)
- 【CONTACT US】Please let us know that if you have any problem with our product, and we will respond within 24 hours. We guarantee 100% REFUND or RE-SEND for each defective molding trim you receive! But you need to check our item’s fitment details to make sure this will fit your vehicle before ordering .
How we tested
We search all the field to find the best Car Moldings and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Moldings from the good.
- Easy To use
- Options
- Quality
- Longevity
How we picked
We search for all the field to find the best Car Moldings and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Moldings from the good.
- Price
- Easy To use
- Customer reviews
- Quality
- Longevity
- Dimensions
Current Offers
- 【Specification】The thick of our car door edge guards is 2mm(0.8'').Metal clips are wrapped in high quality PVC soft rubber.That helps to fit tightly and won't scrap your door edge paint.Fit on most of cars.((Remind of Truck/Van Owners, Please Ensure Your Door Edge Thickness Before Purchasing.)
- 【Buying Guide】It fit on any doors,hood and tailgate, if you want to use it on vertical position of the door, please buy 16Ft(5m).If you use it on both vertical position and bottom of the door, please buy 32Ft(10m). If you want to use it on vertical position and bottom of the door,hood and tailgate, please buy 48Ft(15m)
- 【Product Function】Anti-collision and crash-proof prevent off paint Effective, sound insulation,elegant appearance
- 【Easy Installation】Metal clips are inside soft rubber and sectional arbitrary bending design help install easily, do not need any glue, just press and would fit tightly. Your car door is very clean when you take it off,no any adhesive.
- 【Warranty】We carry 5 years warranty becaseu we use high quality rubber that Waterproof, Isolator Noise, Corrosion Resistance, High Temperature Resistance, Wear Resistance, Anti-Aging, UV Resistance.
- Protect the window and door, reduce wear on window/door while open and close.
- Perfect for doors and window frames.
- Easy to cut and easy to install, no requires specialist tool.
- Preventing dust collection between sliding doors or windows.
- It is widely used in the car before and after the windshield, doors, windows, launch cabin, trunk and other body parts.
- Flexible 2 Inch Chrome Molding for Trucks
- Durable Long Lasting Chrome Finish
- Simple to Cut to Length You Need
- Easy to Install with 3M Adhesive Backing
- 2 Inches x 16 Feet
- Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).
- Model: 3614, 03614, MOLDING TAPE, ATTACHMENT TAPE
- Brand: 3M
- MPN: 3614
- Size: 1/2" X 15'
- 【CUTTING NIPPERS&CLEANING TOWEL PROVIDED. PROTECT YOUR CAR DOORS WITH NO GLUE EDGE GUARDS】Protect against paint chips/door dings. No glue, no messy. Protects your car doors edges as well as those cars parked next to you. 32-4/5Ft is long enough to be installed on 4 doors(vertically and horizontally)on most cars. Packaged in 1 roll so you can Custom Length and reduce wasting strips. Great gift for your families or friends.Open and close doors as usual, also helps reducing some wind/road noise.
- 【UNIVERSAL FIT MULTI-FUNCTIONS EDGE TRIM GUARDS】Fits most of Sedans, Trucks, SUV, ATV, UTV, Boats. Could be used as Truck Fender Fares, ATV edge guard, Boats edge seals, trailer door entry guard, automotive door entry guard, UTV edge guard, storage container seals, tool cart trim and decorative trim seals. Could be installed on front doors, back doors, back hatch door, bonnet edge. Make your cars look more sporty.
- 【BUILD IN METAL CLIPS, PERFECT TIGHTLY FITMENT】Metal clips were built inside soft rubber. They help fit tightly and won't damage your door paint. Never drop even going through car washes and could hold the color over time.
- 【MADE WITH SUPER FLEXIBLE MATERIAL&QUICK AND EASY INSTALLATION】Made with flexible rubber material. Easily bends along the contours of your doors. Recommend to measure length of your doors before install, then use scissors to cut the edge guards. Could be installed in 15 minutes, much easier if you tap lightly with rubber mallet(not included).
- 【BACKED UP WITH SUPPORT FROM BRAND Winunite】FITS MOST OF CARS. NOT suitable for those cars door edges thickness wider than 5mm or those cars equipped with rubber strips(such as T esla, B MW X3). Please refer to our directions, Remember to remove both ends of metal clips before installing. If you have any question while using the product, please contact our customer service for help.
Conclusion
This guide is here to support you in your choice of Car Moldings and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Car Moldings according to your criteria. Your comments are most welcome and they will help us improve the ranking.
Last update on 2022-08-18 at 07:34 / Affiliate links / Images from Amazon Product Advertising API