Essential Guide of Car Replacement Brake Proportioning Valves – October 2021 Edition

Looking to find the best Car Replacement Brake Proportioning Valves?

We researched 29 Car Replacement Brake Proportioning Valves, tested 9, and we have done 30 hours of research. The best Car Replacement Brake Proportioning Valves doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve, Replacement for GM GMC Chevy and Ford street rod, classic trucks, and muscle cars 172-1353 172-1361 (PV2)
  • (Specifics) This is a universal PV2 Valve it will work on any vehicle as long as you can hook it up, though you may need to block off one of the front ports.
  • (Application) This PV-2 proportioning valve works for almost any Chevy or Ford street rod, classic truck, or muscle car. Contains Standard 9/16"-18 and 1/2"-20 fittings. Please note fitting sizes for plumbing before purchasing, (2) 3/8-24 ports for front left and right caliper and (1) 9/16-18 port for the rear brakes 1/2-20" & 7/16-18" ports in from the master cylinder.
  • (Interchangeable Part #) Replace for 25509419, 172-1353(disc-drum) and 172-1361(disc-disc) valves
  • (Installation) Please see Product Description for Details.
  • (Note) When upgrading your vehicle from drum to disc, these small items are a must. These components ensure proper fluid transfer and contain a residual pressure valve for proper braking feel. These valves contain a low pressure shut off valve to ensure driver and vehicle safety should your brake system lose hydraulic line pressure.

Intro

Here’s your guide to choosing the best Car Replacement Brake Proportioning Valves. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Car Replacement Brake Proportioning Valves of different brands and prices based on the best value for money. This ranking was created to help you find the best Car Replacement Brake Proportioning Valves depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Car Replacement Brake Proportioning Valves that’s right for you!

Our picks

No. 1
Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve, Replacement for GM GMC Chevy and Ford street rod, classic trucks, and muscle cars 172-1353 172-1361 (PV2)
  • (Specifics) This is a universal PV2 Valve it will work on any vehicle as long as you can hook it up, though you may need to block off one of the front ports.
  • (Application) This PV-2 proportioning valve works for almost any Chevy or Ford street rod, classic truck, or muscle car. Contains Standard 9/16"-18 and 1/2"-20 fittings. Please note fitting sizes for plumbing before purchasing, (2) 3/8-24 ports for front left and right caliper and (1) 9/16-18 port for the rear brakes 1/2-20" & 7/16-18" ports in from the master cylinder.
  • (Interchangeable Part #) Replace for 25509419, 172-1353(disc-drum) and 172-1361(disc-disc) valves
  • (Installation) Please see Product Description for Details.
  • (Note) When upgrading your vehicle from drum to disc, these small items are a must. These components ensure proper fluid transfer and contain a residual pressure valve for proper braking feel. These valves contain a low pressure shut off valve to ensure driver and vehicle safety should your brake system lose hydraulic line pressure.
SaleNo. 2
Car Brake Proportioning Valve for Toyota Tundra 2000-2006 V6.34L V8 4.7L 47910-34060
  • Fits: for Toyota Tundra 2000-2006 V6.34L V8 4.0L 4.7L
  • Part Number: 47910-34060
  • Direct fitment, perfect replacement
  • 100% tested before shipping to ensure product safety, stability and durability
  • Please make sure the OE number matches the part you are replacing
No. 3
Allstar ALL48025 Brake Proportioning Valve
  • Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knob
  • Valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt
  • Valve also includes two fittings to adapt to 3/16 inch brake line
  • Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall
  • Sold each

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 30 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Replacement Brake Proportioning Valves information.
As for me, I’m very familiar with the Car Replacement Brake Proportioning Valves since I got it from 4 years.

Top 10

No. 1
Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve, Replacement for GM GMC Chevy and Ford street rod, classic trucks, and muscle cars 172-1353 172-1361 (PV2)
  • (Specifics) This is a universal PV2 Valve it will work on any vehicle as long as you can hook it up, though you may need to block off one of the front ports.
  • (Application) This PV-2 proportioning valve works for almost any Chevy or Ford street rod, classic truck, or muscle car. Contains Standard 9/16"-18 and 1/2"-20 fittings. Please note fitting sizes for plumbing before purchasing, (2) 3/8-24 ports for front left and right caliper and (1) 9/16-18 port for the rear brakes 1/2-20" & 7/16-18" ports in from the master cylinder.
  • (Interchangeable Part #) Replace for 25509419, 172-1353(disc-drum) and 172-1361(disc-disc) valves
  • (Installation) Please see Product Description for Details.
  • (Note) When upgrading your vehicle from drum to disc, these small items are a must. These components ensure proper fluid transfer and contain a residual pressure valve for proper braking feel. These valves contain a low pressure shut off valve to ensure driver and vehicle safety should your brake system lose hydraulic line pressure.
SaleNo. 2
Car Brake Proportioning Valve for Toyota Tundra 2000-2006 V6.34L V8 4.7L 47910-34060
  • Fits: for Toyota Tundra 2000-2006 V6.34L V8 4.0L 4.7L
  • Part Number: 47910-34060
  • Direct fitment, perfect replacement
  • 100% tested before shipping to ensure product safety, stability and durability
  • Please make sure the OE number matches the part you are replacing
No. 3
Allstar ALL48025 Brake Proportioning Valve
  • Proportioning valves allows adjustment of front-to-rear brake bias with a simple twist of the knob
  • Valve provides up to 57 percent reduction and has fitting ports that are 1/8 npt
  • Valve also includes two fittings to adapt to 3/16 inch brake line
  • Dimensions are 1 inch long x 1-3/4 inch wide and 3-5/16 inch tall
  • Sold each
No. 4
JEGS Proportioning Valve | For 4-Wheel Disc Brake Conversions | One-Piece Brass Body | (2) 3/8'-24 Ports for Front Brakes & (1) 9/16'-18 Port for Rear Brakes
1 Reviews
JEGS Proportioning Valve | For 4-Wheel Disc Brake Conversions | One-Piece Brass Body | (2) 3/8"-24 Ports for Front Brakes & (1) 9/16"-18 Port for Rear Brakes
  • ENSURES PROPER brake bias from front to rear to prevent lock up of wheels
  • DESIGNED FOR 4-wheel disc brake conversions
  • SPECIFICATIONS: (2) 3/8"-24 Ports for Front Brakes & (1) 9/16"-18 Port for Rear Brakes, 7/16-24 & ½-20 inlets
  • CONSTRUCTED FROM a one-piece brass body
  • MUST HAVE COMPONENT to complete your custom brake system
No. 5
Residual Pressure Valve, 2lb Residual Valve Residual Brake Pressure Check Valve Brake Proportioning Valve RV02‑EBM01 Replacement Universal for Race Cars Drifting 1971‑77
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【OE Number】- High characteristic and reliable performance, easy to install. Replacing OE numbers for reference: RV02‑EBM01. Conform to strict quality control standards, dependable to use.
  • 【Function】Residual Brake Pressure Check Valve enhances the control and helps turning during braking. Keeps brake pressure constant. High characteristic and reliable performance, easy to install.
  • 【Wide Application】Residual Drum Brake Proportioning 2lb Check Valve is usually used on the rear drum brakes, fit for race cars, drifting, rally and track day cars, etc. Easy to install, no complicated tools required, convenient to use.
  • 【Material: Aluminum Alloy】- Residual Press Valve made of high quality aluminum alloy material, high strength, sturdy and durable. Built to meet standard specification, strictly follow factory quality control.
  • 【Please Note】- Please double check the part number of your item, matching information is for reference only. If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!
No. 6
PQY Brake Bias Proportioning Valve Pressure Regulator 1/8NPT Inlet&Outlet For Brake Adjustment
  • ✿ HIGH QUALITY:Made of high quality aluminum,black textured ,looks decent.
  • ✿WHAT YOU GET: 1*Adustable rear brake bias valve,2*10ANxM22 adapters
  • ✿ PERFORMANCE:Pressure adjustments range from 100-1000psi.Provide for a maximum decrease of 57%in line pressure.Allow you to fine tune the front to rear braking balance.
  • ✿ PORT THREAD SIZE:The two ports size fit 10ANxM22. Come with two 10ANxM22 adapters
  • ✿PQY CUSTOMER SERVICE:If you have any problem ,please contact us ,and we will respond you in 24hours except weekends and holidays !!!
No. 7
GM Genuine Parts 19244448 Brake Proportioning Valve
  • Package Weight: 0.25 Lb.
  • Product Type: Auto Part
  • Package Quantity: 1
  • Package Dimensions: 16.002Cm (L) X 14.986Cm (W) X 2.286Cm (H)
No. 8
UTSAUTO PV2 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve PV2
  • Has standard 9/16"-18 and 1/2"-20 fittings.
  • Fits most OEM dual-reservoir type master cylinders.
  • This combination-proportioning brass valves are based on the popular AC DELCO 172-1353(disc-drum) and 172-1361(disc-disc) valves.
  • This PV-2 proportioning valve works for almost any Chevy or Ford street rod, classic truck, or muscle car.
  • For use with disc brake front and drum rear applications. Two lines out for the front. One line out for the rear. Inlet sizes are 1/2 in.-20 (Front) and 7/16 in.-24 (Rear). Outlet sizes to front are 3/8 in.-24 and rear outlet is 9/16 in.-18.
No. 9
A-Team Performance Universal Brake Proportioning Valve Wire Sensor Compatible with All Proportioning Valves PV2 PV4 Pigtail Cable Wiring Harness (AC Delco and Right Stuff Valve)
  • A -Team Performance Universal Brake Proportioning Valve Wire Sensor Fits all Proportioning Valves PV2/PV4
  • Compatible With: PV2 Valve
  • PV4 Valve
  • AC Delco Valve
  • Right Stuff Valve

How we tested

We search all the field to find the best Car Replacement Brake Proportioning Valves and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Replacement Brake Proportioning Valves from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Car Replacement Brake Proportioning Valves and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Replacement Brake Proportioning Valves from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 2
Wilwood 4444/30 260-11179 Proportioning Valve
  • Package Dimensions: 22.86 cms (L) x 18.415 cms (W) x 4.318 cms (H)
  • Product Type: Valve
  • Package Quantity: 1
  • Country Of Origin: United States
SaleNo. 3
UTSAUTO PV6 Brake Proportioning Valve Brass Disc/Disc Brake System Combination Valve Fit for 1960-70 Ford Mustang Fairlane Galaxie Comet Proportioning Valve Disc Drum Brakes
  • Condition:New (not rebuilt) PV6 Brake Proportioning Valve
  • PV6 Brake Proportioning Valve Material: Brass
  • PV6 Brake Proportioning Valve for Ford Placement on Vehicle: Front
  • Fits for 1965-1973 Ford Mustang OEM-Style Disc/Drum Proportioning Valve
  • Fits for Ford disc brake prop valve Fits early 70's but used to convert 60's drum cars to disc brakes.
SaleNo. 4
Dorman 905-952 Brake Proportioning Valve for Select Models
  • Direct replacement - this brake proportioning valve is designed to match the fit and function of the original valve on specified vehicles
  • Restores functionality - this valve is made to fit and fully restore part functionality after the original valve fails
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
SaleNo. 5
PV2 Combination Proportioning Valve, PV71 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve,172-1353 Front Drum Rear Brake fit for Ford Chevy Classic Car Truck
6 Reviews
PV2 Combination Proportioning Valve, PV71 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve,172-1353 Front Drum Rear Brake fit for Ford Chevy Classic Car Truck
  • Performance Combination-Proportioning Valve replace part number:172-1353 (PV2) , 172-1361, PV2 172-1353 PV71 Disc/Drum Brakes.
  • 172-1353 PV2 Front Disc Rear Drum Combination-Proportioning Valve fits most OEM dual-reservoir type master cylinders, Brake line ports are 1/2'' and 7/16''.
  • PV2 Disc/Drum Disc Front Drum Rear Brass Brake Proportioning Valve widely applicable to most cars, fit for Ford Chevy Classic Car Truck.
  • This PV-2 proportioning valve is made of solid brass for durable and longer service life. Built with heavy duty feature. Compatible with nearly all vehicles that have disc brakes in the front and disc brakes in the rear.
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit.

Conclusion

This guide is here to support you in your choice of Car Replacement Brake Proportioning Valves and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Car Replacement Brake Proportioning Valves according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-10-17 at 10:04 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment