Looking to find the best Car Replacement Power Steering Pressure Hoses?
We researched 28 Car Replacement Power Steering Pressure Hoses, tested 15, and we have done 10 hours of research. The best Car Replacement Power Steering Pressure Hoses doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.
The best
No. 1 
Gates 358980 Power Steering Pressure Line Hose Assembly
- Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets
- Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps
- Exceeds SAE J2050 performance requirements
- General instructions packed with every individually-bagged assembly
Intro
Here’s your guide to choosing the best Car Replacement Power Steering Pressure Hoses. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Car Replacement Power Steering Pressure Hoses of different brands and prices based on the best value for money. This ranking was created to help you find the best Car Replacement Power Steering Pressure Hoses depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Car Replacement Power Steering Pressure Hoses that’s right for you!
Our picks
No. 1
Gates 358980 Power Steering Pressure Line Hose Assembly
- Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets
- Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps
- Exceeds SAE J2050 performance requirements
- General instructions packed with every individually-bagged assembly
No. 2
Power Steering Pressure Hose Assembly Replacement for Honda Odyssey V6 3.5L 2005 2006 2007 (# 53713-SHJ-A01)
- √ Condition: Brand new and high quality, well packed
- √ Replacement for Honda Odyssey V6 3.5L 2005-2007
- √ Replace # 53713-SHJ-A01, 53713SHJA01.
- √ Fine Workmanship: With great sealing performance, this power steering pressure hose is used to replace your leaking hose.
- √ Built to strict quality control standards, 2 years warranty, hassle-free return and money back policy, buy with confidence!
No. 3
Sunsong 3402215 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Why you should trust us
This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 10 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Replacement Power Steering Pressure Hoses information.
As for me, I’m very familiar with the Car Replacement Power Steering Pressure Hoses since I got it from 5 years.
Top 10
No. 1
Gates 358980 Power Steering Pressure Line Hose Assembly
- Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets
- Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps
- Exceeds SAE J2050 performance requirements
- General instructions packed with every individually-bagged assembly
No. 2
Power Steering Pressure Hose Assembly Replacement for Honda Odyssey V6 3.5L 2005 2006 2007 (# 53713-SHJ-A01)
- √ Condition: Brand new and high quality, well packed
- √ Replacement for Honda Odyssey V6 3.5L 2005-2007
- √ Replace # 53713-SHJ-A01, 53713SHJA01.
- √ Fine Workmanship: With great sealing performance, this power steering pressure hose is used to replace your leaking hose.
- √ Built to strict quality control standards, 2 years warranty, hassle-free return and money back policy, buy with confidence!
No. 3
Sunsong 3402215 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
No. 4
Sunsong 3402221 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
SaleNo. 5
Sunsong 3401109 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
- Fit type: Vehicle Specific
No. 6
Sunsong 3401201 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
No. 7
Sunsong 3401061 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
No. 8
Edelmann 80332 Power Steering Pressure Hose: Replacement for - 2007-99 Chevrolet Silverado, GMC Sierra; W/4WD, Black
- Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit
- Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely
- Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi
- Mounting Brackets, heat shields and convoluted sheathing to protect the hose are included where applicable
- 16mm male O-ring x 18mm male O-ring
No. 9
Plews & Edelmann 70917 Power Steering Pressure Hose: Replacement for - 1972-67 GM Trucks
- Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit
- Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely
- Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi
- Mounting brackets, heat shields and convoluted sheathing to protect the hose are included where applicable
- 3/8 inch male inverted flare x 7/16 inch male inverted flare
No. 10
Sunsong 3401324 Power Steering Pressure Line Hose Assembly
- pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life
- all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
How we tested
We search all the field to find the best Car Replacement Power Steering Pressure Hoses and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Replacement Power Steering Pressure Hoses from the good.
- Easy To use
- Options
- Quality
- Longevity
How we picked
We search for all the field to find the best Car Replacement Power Steering Pressure Hoses and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Replacement Power Steering Pressure Hoses from the good.
- Price
- Easy To use
- Customer reviews
- Quality
- Longevity
- Dimensions
Current Offers
SaleNo. 1
Sunsong 3401109 Power Steering Pressure Line Hose Assembly
- Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life
- All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose
- Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
- Fit type: Vehicle Specific
Conclusion
This guide is here to support you in your choice of Car Replacement Power Steering Pressure Hoses and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Car Replacement Power Steering Pressure Hoses according to your criteria. Your comments are most welcome and they will help us improve the ranking.
Click to rate this post!
[Total: 0 Average: 0]
Last update on 2022-05-28 at 00:45 / Affiliate links / Images from Amazon Product Advertising API