Essential Guide of Car Wheel Well Moldings – May 2022 Edition

Looking to find the best Car Wheel Well Moldings?

We researched 24 Car Wheel Well Moldings, tested 12, and we have done 16 hours of research. The best Car Wheel Well Moldings doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Cowles T3602C Black Half Round Wheel Well
  • Cowles T3602C Black Half Round Wheel Well

Intro

Here’s your guide to choosing the best Car Wheel Well Moldings. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Car Wheel Well Moldings of different brands and prices based on the best value for money. This ranking was created to help you find the best Car Wheel Well Moldings depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Car Wheel Well Moldings that’s right for you!

Our picks

No. 1
Cowles T3602C Black Half Round Wheel Well
  • Cowles T3602C Black Half Round Wheel Well
No. 2
Trim-Gard Automotive Wheel Well Molding 7/16" Wide x 20' Long Black 0302-20
  • 7/16" ((11.0mm) Half round molding made to apply to the curve around wheel wells
  • Comes with 3M acrylic automotive tape for secure fastening.
  • Comes in single length 20 feet (6.1M) long to be cut to desired length
No. 3
D-Lumian Fender Flare Edge Rubber Trim - Gasket Welting T-Style 30 Feet Length EPDM Trims for Car and Truck Wheel Wells, Bonds w/ 3M Automotive Grade Tape
  • 🚗【Creates Barrier】Helps protect vehicles paint by providing a flexible rubber gaskets between vehicle’s body panel and fender flare.
  • 🚗【Improves Fitment】By adding extra coverage between the fender flare and vehicle’s body panel, helps reduce gaps for tighter fitment.
  • 🚗【Prevents Vibration】Wiper style shape helps provide protective gasket to help reduce or prevent vibration. not for applications with sharp curves - if your fender flares has 90 degree angles, this “T-Style” King fender flare trim is not recommended due to its shape.
  • 🚗【Easy Install 】30 feet (9 meters length): easy peel-and-stick on high quality 3M automotive grade adhesive tape applied to fender flare. when installing the product onto the mudguard, in order to better fit the product to the mudguard, first clean the dust and mud on the mudguard with a wet towel. Then dry the water stain with a dry towel. Then install the decorative stickers to the mudguard.
  • 🚗【D-Lumina Promise】Offer 1 year warranty on item(s) damaged during delivery or have a confirmed manufacturer defect.and provide 45 days money-back guarantee (contact D-Lumina) friendly customer service and U.S. local customer support.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 16 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Wheel Well Moldings information.
As for me, I’m very familiar with the Car Wheel Well Moldings since I got it from 4 years.

Top 10

No. 1
Cowles T3602C Black Half Round Wheel Well
  • Cowles T3602C Black Half Round Wheel Well
No. 2
Trim-Gard Automotive Wheel Well Molding 7/16" Wide x 20' Long Black 0302-20
  • 7/16" ((11.0mm) Half round molding made to apply to the curve around wheel wells
  • Comes with 3M acrylic automotive tape for secure fastening.
  • Comes in single length 20 feet (6.1M) long to be cut to desired length
No. 3
D-Lumian Fender Flare Edge Rubber Trim - Gasket Welting T-Style 30 Feet Length EPDM Trims for Car and Truck Wheel Wells, Bonds w/ 3M Automotive Grade Tape
  • 🚗【Creates Barrier】Helps protect vehicles paint by providing a flexible rubber gaskets between vehicle’s body panel and fender flare.
  • 🚗【Improves Fitment】By adding extra coverage between the fender flare and vehicle’s body panel, helps reduce gaps for tighter fitment.
  • 🚗【Prevents Vibration】Wiper style shape helps provide protective gasket to help reduce or prevent vibration. not for applications with sharp curves - if your fender flares has 90 degree angles, this “T-Style” King fender flare trim is not recommended due to its shape.
  • 🚗【Easy Install 】30 feet (9 meters length): easy peel-and-stick on high quality 3M automotive grade adhesive tape applied to fender flare. when installing the product onto the mudguard, in order to better fit the product to the mudguard, first clean the dust and mud on the mudguard with a wet towel. Then dry the water stain with a dry towel. Then install the decorative stickers to the mudguard.
  • 🚗【D-Lumina Promise】Offer 1 year warranty on item(s) damaged during delivery or have a confirmed manufacturer defect.and provide 45 days money-back guarantee (contact D-Lumina) friendly customer service and U.S. local customer support.
No. 4
Dawn Enterprises FG-15025 Wheel Arch Molding - Matte Black (02-R)
17 Reviews
Dawn Enterprises FG-15025 Wheel Arch Molding - Matte Black (02-R)
  • Multiple uses and applications
  • 1 1/2” FenderGard Molding with Lip
  • 25' roll
  • Made in the USA
  • Fits most vehicles
No. 5
TRUE LINE Automotive Universal Inner Reflective Black Carbon Fiber Wheel Well Fender Door Bumper Trim Molding (Silver)
  • Kit comes with 2 pieces of carbon fiber makers with inner reflective trim.
  • Universal fit for all makes and models. Item size is 6.75 inch X 1 inch .
  • Items is backed with self-adhesive for an easy installation. Simply peel and stick.
  • Package Dimensions : ?22.86 x 10.16 x 0.25 cm;
No. 6
Dawn Enterprises, Inc. W71618HG-PK Universal Fit Gloss Black Wheel Well Trim Pack 18' Protection for Cars, Trucks, Vans, and More
  • MULTIPLE USES AND APPLICATIONS - Although this Wheel Well Trim is intended for use on your wheel wells to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
  • ENOUGH INCLUDED FOR ONE VEHICLE - This 7/16" wide, 3/16" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
  • STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
  • MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
  • FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean edge on your vehicle, you can install a Wheel Well Molding to. Get creative and you'll be surprised at how good your vehicle can look!
No. 7
TRUE LINE Automotive Chrome Wheel Well Fender Molding Trim Kit 5/8 Wide
  • Flexible design makes it easy for DIY installation.
  • Made in the USA
  • Universal fit - works on all cars and trucks
  • Additional trimming is required
  • One kit fits one car all four wheel wells.
No. 8
Dawn Enterprises, Inc. W60118-PK Universal Fit Matte Black Wheel Well Trim Pack 18' Protection for Cars, Trucks, Vans, and More
  • MULTIPLE USES AND APPLICATIONS - Although this Wheel Well Trim is intended for use on your wheel wells to prevent damage, there are plenty of other applications that you can use it for. Easily add style and protection to the exterior of your vehicle by applying this molding wherever you could use a layer of defense!
  • ENOUGH INCLUDED FOR ONE VEHICLE - This 1/2" wide, 3/16" thick molding kit comes packaged as an 18' roll, which is enough to cover an application to your car or truck. You might even have a bit left over to enhance some of the other unprotected areas on the exterior of your vehicle!
  • STYLE AND PROTECTION - If you leave an area of your vehicle without a protective molding, there's a good chance that it may receive some unsightly marks or damage over time. Protect your investment, without sacrificing style, with a stylish molding kit from Dawn Enterprises, Inc. It only takes a few minutes to provide a lifetime of protection!
  • MADE IN THE USA - Located in the Greater Cleveland area, Dawn Enterprises, Inc. proudly manufactures their extruded products in their warehouse located in the United States. The workmanship of American workers is unmatched, resulting in a high quality product that supports the lives of employees residing in the United States. Have a question? Call and you'll be connected to a trained Dawn Enterprises customer service representative at the Ohio office.
  • FITS MOST VEHICLES - This molding kit is a universal, cut-to-fit product. Anywhere that there's a clean edge on your vehicle, you can install a Wheel Well Molding to. Get creative and you'll be surprised at how good your vehicle can look!
No. 9
TRUE LINE Automotive Black Wheel Well Fender Molding Trim Kit 5/8'' Wide
  • Flexible design makes it easy for DIY installation.
  • Made in the USA
  • Universal fit - works on all cars and trucks
  • Additional trimming is required
  • One kit fits one car all four wheel wells.
No. 10
QAA is Compatible with 1998-2002 Lincoln Town Car 4 Piece Molded Stainless Steel Wheel Well Fender Trim Molding, 2.25" Width WZ38680
  • This QAA part is designed to fit the 1998-2002 Lincoln Town Car, 4-door.
  • What's included in the box? Your package will include QAA's 4 piece Molded Stainless Steel Wheel Well Fender Trim Molding, 2.25" Width, Clip on or screw in installation, Lock Tab and screws, hardware included. - QAA WZ38680
  • Wheel Well Fender Trim
  • High Quality Stainless Steel - Imported.
  • Clips OR Screws provided for Easy installation! Cut to perfection & Polished to a Mirror Shine

How we tested

We search all the field to find the best Car Wheel Well Moldings and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Wheel Well Moldings from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Car Wheel Well Moldings and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Wheel Well Moldings from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
sdano Fender Flares Edge Trim, Fender Flare Rubber Seal for Car and Truck Wheel Wells, Rubber Gasket for Fender Flares Universal, Bonds w/ 3M Automotive-Grade Adhesive Tape, T-Style, 30’ Length
  • PROVIDE PROTECTION: This flare trim is installed between the fender flare and the vehicle’s body, which can isolate vibration, reduce friction, protect the car paint, and eliminate the risk of pinching rocks and debris between the fender flare and the body of your vehicle.
  • CLEAN LINES: Wiper style shape, adding extra coverage to your vehicle, creates a clean line between the vehicle’s body and the flare.
  • HIGH PERFORMANCE: This fender flare edge trim is made of EPDM rubber material with excellent performance, ozone resistant, weather-resistant, very flexible.
  • SAVE MONEY: 30 FEET length, enough to cover all 4 fender flares. No need re-order to finish the job, save your money.
  • EASY TO INSTALL: This fender flare trim comes in acrylic automotive-grade adhesive tape.Strong bonding and easy installation.
SaleNo. 2
GOOACC 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
SaleNo. 3
GOOACC 425 Pcs Car Body Retainer Clips Set Tailgate Handle Rod Clip & Fastener Remover - 19 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
3,764 Reviews
GOOACC 425 Pcs Car Body Retainer Clips Set Tailgate Handle Rod Clip & Fastener Remover - 19 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
  • 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Nissan, Mazda, Jeep, 2001 MR2 Spyder, 06 350z,1996 Ford F-250, motorcycles, Honda , Chevy Silverado. But NOT ONLY for these cars, if the sizes and shape meet your needs well, it's also a useful kit.
  • 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
  • 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted.
  • 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
SaleNo. 4
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
25,488 Reviews
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

Conclusion

This guide is here to support you in your choice of Car Wheel Well Moldings and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Car Wheel Well Moldings according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2022-05-20 at 22:55 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment