Essential Guide of Engine Tilters – March 2021 Edition

Looking to find the best Engine Tilters?

We researched 27 Engine Tilters, tested 14, and we have done 16 hours of research. The best Engine Tilters doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
AFF Heavy Duty Steel Engine Tilter Accessory for Engine Crane, 1 Ton (2,000 lbs) Capacity, 582
  • Application: This impressive engine tilter works with the lifting chain to level out the engine weight by adjusting the angle the engine is held at, making lifting easier and safer
  • Use: The tool has a tough steel construction that resists corrosion; Used with all AFF model cranes and other common engine cranes to efficiently change an engine’s center-of-gravity when installing or removing from a vehicle
  • Capacity: Ideal for use in a range of situations and capable of hoisting even the heaviest of engine blocks; This tool has a 2,200 lb. weight capacity and a 23. 5" wide support bracket that can easily be attached to the engine for lifting security
  • Part number: 582

Intro

Here’s your guide to choosing the best Engine Tilters. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Engine Tilters of different brands and prices based on the best value for money. This ranking was created to help you find the best Engine Tilters depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Engine Tilters that’s right for you!

Our picks

No. 1
AFF Heavy Duty Steel Engine Tilter Accessory for Engine Crane, 1 Ton (2,000 lbs) Capacity, 582
  • Application: This impressive engine tilter works with the lifting chain to level out the engine weight by adjusting the angle the engine is held at, making lifting easier and safer
  • Use: The tool has a tough steel construction that resists corrosion; Used with all AFF model cranes and other common engine cranes to efficiently change an engine’s center-of-gravity when installing or removing from a vehicle
  • Capacity: Ideal for use in a range of situations and capable of hoisting even the heaviest of engine blocks; This tool has a 2,200 lb. weight capacity and a 23. 5" wide support bracket that can easily be attached to the engine for lifting security
  • Part number: 582
SaleNo. 2
Trans-Dapt Performance 9099 Engine Tilter
  • Package Dimensions: 10.16 H x 96.52 L x 22.86 W (centimetres)
  • Country of Origin : United States
  • Fit type: Vehicle Specific
  • Package Weight: 0.022 pounds
SaleNo. 3
BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red
  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations
  • Features (4) 14" length chains, each equipped with an L-bracket assembly
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease
  • Heavy duty engine leveler easily changes center of gravity, saving time and labor; Includes a 1 year limited manufacturer warranty

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 16 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Engine Tilters information.
As for me, I’m very familiar with the Engine Tilters since I got it from 4 years.

Top 10

No. 1
AFF Heavy Duty Steel Engine Tilter Accessory for Engine Crane, 1 Ton (2,000 lbs) Capacity, 582
  • Application: This impressive engine tilter works with the lifting chain to level out the engine weight by adjusting the angle the engine is held at, making lifting easier and safer
  • Use: The tool has a tough steel construction that resists corrosion; Used with all AFF model cranes and other common engine cranes to efficiently change an engine’s center-of-gravity when installing or removing from a vehicle
  • Capacity: Ideal for use in a range of situations and capable of hoisting even the heaviest of engine blocks; This tool has a 2,200 lb. weight capacity and a 23. 5" wide support bracket that can easily be attached to the engine for lifting security
  • Part number: 582
SaleNo. 2
Trans-Dapt Performance 9099 Engine Tilter
  • Package Dimensions: 10.16 H x 96.52 L x 22.86 W (centimetres)
  • Country of Origin : United States
  • Fit type: Vehicle Specific
  • Package Weight: 0.022 pounds
SaleNo. 3
BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red
  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations
  • Features (4) 14" length chains, each equipped with an L-bracket assembly
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease
  • Heavy duty engine leveler easily changes center of gravity, saving time and labor; Includes a 1 year limited manufacturer warranty
No. 4
Orion Motor Tech 2 Ton (4000lbs) Engine Hoist/Shop Crane/Cherry Picker Load Leveler with Chains
  • PREMIUM QUALITY STRUCTURAL STEEL: Made from rugged top quality structural steel, this 2-ton engine hoist is durable, sturdy, and ready to take on the toughest projects inside the garage.
  • HEAVY-DUTY FOR JOBS UP TO 2 TONS: This garage hoist is built to handle the most heavy-duty jobs. From small engines up to a load capacity of 2 tons, the sturdy chains will keep your engine balanced and intact.
  • EASY TO USE CRANKSHAFT: Easy to mount and even easier to use. Perfect to use as a reliable shop crane or in your home garage for that classic Shelby you’ve been working on for months. Simply attach the chains to the engine, crank the threaded shaft, and balance the load with ease.
  • COMPACT SIZE 21" (L) x 8" (H) x 2" (W): The engine hoist compact size is great for those working in home garages or in small mechanic shops. Don’t be fooled by its size though, this cherry picker packs a punch with the payload it can lift.
  • INSTALL & REMOVE ENGINES, TRANSMISSIONS, OR ANY HEAVY LOAD: The crankshaft engine hoist with its long chains works well for everyday vertical lifting & support in automotive and ag repair shops. From engines to differentials to transmissions and other heavy loads, this hoist gets the job done.
No. 5
Sunex International 5207 Engine Transverse bar with Arm Support
  • Country of Origin:China
  • Package length:40.5"
  • Package width:6.0"
  • Package height:5.0"
No. 6
DotLine Adjustable Outboard Motor Tilter
  • Utilizes leverage by hooking onto the back of a flat topped motor shroud (not for curved tops)
No. 7
Mac's Tie-Downs 701001 Pivot Engine Lift Plate
  • Tilt an engine with or without the transmission attached up to 35 degrees in infinite increments with just the turn of a ratchet
  • Fits most carbureted V-6 and V-8 engines; Allows for precise control and damage-free engine installation and removal
  • Adapters for many other engine configurations available, including fuel injection, with more added all the time
  • Mount it to the intake manifold, hook it to your engine hoist, and you are ready to go
  • Made in Idaho
SaleNo. 8
OTC (4305) Engine Load Leveler - 1,500 lb. Capacity
  • 1500 pound capacity
  • Designed to hook to a crane or hoist to handle and position large, bulky components
  • Horizontal tilt can be adjusted to compensate for off-center loads, or adjusted to a certain angle for a component being positioned
No. 9
NEWZQ Tilt Trim Motor with Reservoir 809885A1 809885A2 for Mer-cury Mar-iner Fo-rce, Mer-cury/Mariner Outboards(Single Ram) Late Model 50-150HP, Fo-rce Outboards(Double Ram) 50-125HP
  • Replaces Part Numbers : PT496NK-2 ; 6276 ; 809885A1 ; 809885A2 ; 809885T2 ; 811674 ; 831447 ; 885654T1 ; 885654T2 ; 819479A1 ; 819480A1 ; T1075M ; RT05032 ; 18-6777
  • Fitments: Mer-cury 100ELPTO 2-Stroke 100HP 1988/1989,100ELXLPTO 2-Stroke 100HP 1988,100ELXLPTO 2-Stroke 100HP 1989,115ELPTO 2-Stroke 115HP 1989,115EXLPTO 2-Stroke 115HP 1989,35ELO 35HP 1987-1989,35ELPTO 35HP 1987-1989,35EO 35HP 1987-1989, 35M 35HP 1987-1989, 35ML 35HP 1987-1989,40ELHPTO 2-Stroke 40HP 1989, 40ELO 2-Stroke 40HP 1989, 40ELPTO 2-Stroke 40HP 1989, 50ELO 2-Stroke 50HP 1988-1989, 50ELPTO 2-Stroke 50HP 1988-1989, 60ELO 2-Stroke 60HP 1988-1989, 60ELPTO 2-Stroke 60HP 1988-1989
  • Fitments: Fo-rce 1201 120HP 1990-1992, 1208 120HP 1990-1992, 120ELPT 120HP 1993-1999, 120EXLPT 120HP 1993-1999, 1501 150HP 1989-1992, 1508 150HP 1989-1992, 150ELPT 150HP 1993-1994, 150EXLPT 150HP 1993-1994, 407 40HP 1992, 408 40HP 1992, 40EL 40HP 1993-1994, 40ELPT 40HP 1993-1994, 507 50HP 1991-1992, 508 50HP 1991-1992, 50EL 50HP 1993-1994
  • Fitments: Fo-rce 50ELPT 50HP 1993-1994, 706 70HP 1991-1992, 708 70HP 1991-1992, 70EL 70HP 1993-1995, 70ELPT 70HP 1993-1995, 75EL 75HP 1996-1999, 75ELPT 75HP 1996-1999, 903 90HP 1991-1992, 906 90HP 1991-1992, 908 90HP 1991-1992, 90EL 90HP 1993-1994, 90ELPT 90HP 1993-1999, 90EXLPT 90HP 1993-1999
  • Please carefully check the OEM part number and illustrations to make sure it is compatible with your car. We are always here to solve any problems you may encounter, please contact us and we will respond as soon as possible!
No. 10
Yoursme J-35996-A Rocker Arm Lifter Heavy Duty Tool Fit for Detroit Diesel 50 & 60 Series Engine Rocker Arm Shaft Assembly Repair Removal Tool
  • 【FITMENT】Custom-fitted, fit for Detroit Diesel Series 60.
  • 【ALTERNATIVE】Directly replace to part number J-35996-A.
  • 【APPLICATION】Keep all 3 rocker assemblies in a straight line for easy removal and place them correctly during installation.
  • 【MATERIAL】Made of heavy-duty steel, impact resiatant, excellent solid and durable with great rust and corrosion resistance.
  • 【PREMIUM SUPPORT】 Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Rocker Arm Lifter simply return it for a full refund in 30 days, guarantee with 1 year’s warranty.

How we tested

We search all the field to find the best Engine Tilters and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Engine Tilters from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Engine Tilters and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Engine Tilters from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
Trans-Dapt Performance 9099 Engine Tilter
  • Package Dimensions: 10.16 H x 96.52 L x 22.86 W (centimetres)
  • Country of Origin : United States
  • Fit type: Vehicle Specific
  • Package Weight: 0.022 pounds
SaleNo. 2
BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red
  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations
  • Features (4) 14" length chains, each equipped with an L-bracket assembly
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease
  • Heavy duty engine leveler easily changes center of gravity, saving time and labor; Includes a 1 year limited manufacturer warranty
SaleNo. 3
OTC (4305) Engine Load Leveler - 1,500 lb. Capacity
  • 1500 pound capacity
  • Designed to hook to a crane or hoist to handle and position large, bulky components
  • Horizontal tilt can be adjusted to compensate for off-center loads, or adjusted to a certain angle for a component being positioned

Conclusion

This guide is here to support you in your choice of Engine Tilters and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Engine Tilters according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-03-06 at 22:45 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment