Essential Guide of Hydraulic Fluid Additives – October 2021 Edition

Looking to find the best Hydraulic Fluid Additives?

We researched 18 Hydraulic Fluid Additives, tested 9, and we have done 17 hours of research. The best Hydraulic Fluid Additives doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Duragard Arctic Blue Hydraulic Fluid - 2.5 Gallon Jug
  • Designed for operation in extreme cold temperatures
  • Smoother operation — Excellent frictional control assures quiet and efficient action of hydraulic systems while reducing cavitaion and wear even under severe operating conditions of low or high temperature and high load.
  • Reduced downtime — Year-round protection against ear, rust, corrosion, sludge, and foaming.
  • Long oil life — High dielectric strength* for use in electric service bucket trucks.
  • Extreme Low Temperature — Excellent low temperature properties for use in arctic conditions.

Intro

Here’s your guide to choosing the best Hydraulic Fluid Additives. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Hydraulic Fluid Additives of different brands and prices based on the best value for money. This ranking was created to help you find the best Hydraulic Fluid Additives depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Hydraulic Fluid Additives that’s right for you!

Our picks

No. 1
Duragard Arctic Blue Hydraulic Fluid - 2.5 Gallon Jug
  • Designed for operation in extreme cold temperatures
  • Smoother operation — Excellent frictional control assures quiet and efficient action of hydraulic systems while reducing cavitaion and wear even under severe operating conditions of low or high temperature and high load.
  • Reduced downtime — Year-round protection against ear, rust, corrosion, sludge, and foaming.
  • Long oil life — High dielectric strength* for use in electric service bucket trucks.
  • Extreme Low Temperature — Excellent low temperature properties for use in arctic conditions.
No. 2
Triax Atros Multivis HVLP 46 Full Synthetic Hydraulic Oil, 300% Additive Anti-WEAR Boost, 7,000-10,000 Hour Life, Arctic Grade -54 Cold Flow and High Temp Operations (1 Gallon)
  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications.
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer.
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation.
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool.
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps.
No. 3
XADO Revitalizant EX120 Metal Conditioner for Steering Wheel Power Booster and Hydraulic Equipment Oil Additive - Protecting Fluid from Wear (Syringe, 8 ml)
  • Removes pump howl induced by wear.
  • Restore and Repair Power Steering System
  • Improves power steering performance already after the first 30-60 miles of run. Reduces Steering Effort
  • Reduces noise and vibration level of the hydraulic system pump. Protects parts from wear if the oil level is low.
  • THE DOSAGE DEPENDS ON THE OIL SYSTEM CAPACITY - SEE DOSAGE CHART IN DESCRIPTION

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 17 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Hydraulic Fluid Additives information.
As for me, I’m very familiar with the Hydraulic Fluid Additives since I got it from 4 years.

Top 10

No. 1
Duragard Arctic Blue Hydraulic Fluid - 2.5 Gallon Jug
  • Designed for operation in extreme cold temperatures
  • Smoother operation — Excellent frictional control assures quiet and efficient action of hydraulic systems while reducing cavitaion and wear even under severe operating conditions of low or high temperature and high load.
  • Reduced downtime — Year-round protection against ear, rust, corrosion, sludge, and foaming.
  • Long oil life — High dielectric strength* for use in electric service bucket trucks.
  • Extreme Low Temperature — Excellent low temperature properties for use in arctic conditions.
No. 2
Triax Atros Multivis HVLP 46 Full Synthetic Hydraulic Oil, 300% Additive Anti-WEAR Boost, 7,000-10,000 Hour Life, Arctic Grade -54 Cold Flow and High Temp Operations (1 Gallon)
  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications.
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer.
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation.
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool.
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps.
No. 3
XADO Revitalizant EX120 Metal Conditioner for Steering Wheel Power Booster and Hydraulic Equipment Oil Additive - Protecting Fluid from Wear (Syringe, 8 ml)
  • Removes pump howl induced by wear.
  • Restore and Repair Power Steering System
  • Improves power steering performance already after the first 30-60 miles of run. Reduces Steering Effort
  • Reduces noise and vibration level of the hydraulic system pump. Protects parts from wear if the oil level is low.
  • THE DOSAGE DEPENDS ON THE OIL SYSTEM CAPACITY - SEE DOSAGE CHART IN DESCRIPTION
No. 4
Lucas Oil 10019 Hydraulic Oil Booster and Stop Leak - 32 oz, White
  • Removes varnish and restores pressure for more efficient operation
  • Specially suited for use in equipment with wet brakes
  • Conditions old seals and O-rings to stop and prevent future leaks
  • Extends life of hydraulic fluid up to 2 times
SaleNo. 5
Liqui Moly 20004 Hydraulic Lifter Additive
  • Improves the lubrication properties of the oil
  • Cleans valve bores
  • Suitable for use in vehicles with turbochargers and vehicles with catalytic converters
  • Prevents engine noises caused by hydraulic tappets
  • Flash point: 60.0 degrees_celsius
No. 6
Maxima 56901 15WT Standard Hydraulic Fork Oil - 1 Liter Bottle
  • Maxima Fork Oils are formulated from the highest quality base oils and advanced additives to prevent foaming, seal hardening, oxidation and stiction
  • Lubricinol provides for very low sliding friction and protects internal components from wear
  • Temperature stable viscosity provides for constant fork action and terrain compliance for the front wheel
  • For all front suspension systems, both standard and cartridge
  • 5wt fork oil is normal service weight for MX applications, can be blended for intermediate viscosities
  • Fit type: Vehicle Specific
No. 7
Hydraulic Systems Volume 3: Hydraulic Fluids and Contamination Control
  • Hardcover Book
  • Khalil, Dr. Medhat (Author)
  • English (Publication Language)
  • 346 Pages - 02/16/2019 (Publication Date) - COMPUDRAULIC LLC (Publisher)
No. 8
Lucas Oil 10018-4PK Hydraulic Oil Booster and Stop Leak - 1 Gallon, (Case of 4)
  • Package Dimensions: 13.12 L x 12.37 H x 12.62 W (inches)
  • Package Weight : 32.6 pounds
  • Country of Origin : United States
  • Part number: 10018-4PK
No. 9
Bar's Leaks Jack Oil with Stop Leak - 12.5 oz
  • Stops current leaks and prevents future leaks
  • Works in all floor and bottle jacks and with all snow plow fluids
  • Non-Corrosive, Non-Clogging & Non-Foaming
  • Compatible with all petroleum based, mineral oil, and synthetic fluids
  • Made in the USA, just outside of Detroit
No. 10
MOBIL FLUID 424 High Performance Tractor Hydraulic Fluid - 5 Gal Pail
  • MOBILFLUID 424 Tractor Hydraulic Fluid is an extra high performance multipurpose tractor lubricant
  • Engineered to meet or exceed transmission and hydraulic fluid requirements
  • Designed to optimise the performance of agricultural and commercial tractors operating in a wide range of environments and conditions.
  • Combines select base oils and an advanced additive package to deliver the varied lubricant performance properties required in severe duty applications of agricultural and construction equipment drive trains.

How we tested

We search all the field to find the best Hydraulic Fluid Additives and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Hydraulic Fluid Additives from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Hydraulic Fluid Additives and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Hydraulic Fluid Additives from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
LUCAS 10018 Hydraulic Oil Booster with Stop Leak, 1 Gallon, Brown
  • Lucas, gallon hydraulic oil booster & stop leak, additive for hydraulic systems that stops leaks & increases hydraulic pressure
  • Adds extra shine to your product
  • Manufactured in china
  • Stops leaks
  • Prevents major overhauls
  • Reduces heat
  • Increases equipment life
SaleNo. 2
Liqui Moly 20004 Hydraulic Lifter Additive
  • Improves the lubrication properties of the oil
  • Cleans valve bores
  • Suitable for use in vehicles with turbochargers and vehicles with catalytic converters
  • Prevents engine noises caused by hydraulic tappets
  • Flash point: 60.0 degrees_celsius

Conclusion

This guide is here to support you in your choice of Hydraulic Fluid Additives and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Hydraulic Fluid Additives according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-10-20 at 11:15 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment