Essential Guide of Jewelry Making Pin Backs – September 2020 Edition

Looking to find the best Jewelry Making Pin Backs?

We researched 24 Jewelry Making Pin Backs, tested 12, and we have done 13 hours of research. The best Jewelry Making Pin Backs doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Shappy 100 Pieces Bar Pins Brooch Pin Backs Safety Clasp with Plastic Box, 4 Sizes 20 mm, 25 mm, 32 mm and 38...
  • Package: includes totally 100 pieces bar pins in 4 sizes (20 mm: 30 pieces, 25 mm: 30 pieces, 32 mm: 20 pieces, and 38 mm: 20 pieces)
  • Easy to attach: these pin backs with 2 or 3 holes, and their backs are flat, so you can stick the attached crafts with glue, or sew the hole directly
  • Secure safety pin backs: with annular bayonet design, not easy to drop and fall apart; Stainless steel plated, not easy to get rusty
  • DIY crafts accessory: brooch backs are good for attaching beads, dangles and various jewellery findings to create an unique and personalized ornaments
  • More uses: pin backs can be glued onto most surfaces to DIY crafts, suitable for jewel crafting, sewing fabric, making corsage, name badges and more

Intro

Here’s your guide to choosing the best Jewelry Making Pin Backs. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Jewelry Making Pin Backs of different brands and prices based on the best value for money. This ranking was created to help you find the best Jewelry Making Pin Backs depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Jewelry Making Pin Backs that’s right for you!

Our picks

No. 1
Shappy 100 Pieces Bar Pins Brooch Pin Backs Safety Clasp with Plastic Box, 4 Sizes 20 mm, 25 mm, 32 mm and 38...
  • Package: includes totally 100 pieces bar pins in 4 sizes (20 mm: 30 pieces, 25 mm: 30 pieces, 32 mm: 20 pieces, and 38 mm: 20 pieces)
  • Easy to attach: these pin backs with 2 or 3 holes, and their backs are flat, so you can stick the attached crafts with glue, or sew the hole directly
  • Secure safety pin backs: with annular bayonet design, not easy to drop and fall apart; Stainless steel plated, not easy to get rusty
  • DIY crafts accessory: brooch backs are good for attaching beads, dangles and various jewellery findings to create an unique and personalized ornaments
  • More uses: pin backs can be glued onto most surfaces to DIY crafts, suitable for jewel crafting, sewing fabric, making corsage, name badges and more
No. 2
eBoot Tie Tacks Blank Pins with PVC Rubber Pin Backs (100)
  • Pins size: 10 mm in diameter, 9 mm in length; Material: PVC rubber and nickel plated brass; Rubber pin keeper size: 12 mm in diameter, 7 mm in height
  • Practical shape: protruding half round shape handle on the pin back is designed for easy grasp, thus you can be convenient to take on
  • Tight rubber pin back: the PVC pin back is tight and they are not easy to fall off; Each pin back has a hole which is compatible with the tie tack pin
  • Multiple purpose: good for jewelry making; You also can use the tie back to fix object, such as photos, fabrics, cloth, map, scrapbook, etc.
  • Replacement for the lost pin back: can be the pin clutch backs, fits for all lapel pins, tie tacks, citation bars, service bars and jewelry
No. 3
Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags...
  • Material: Metal; Color: Silver. Length: 0.75”/20mm.
  • Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create...
  • These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair...
  • Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration.
  • Package includes: 30pcs * brooch safety pin backs clasps.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 13 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Jewelry Making Pin Backs information.
As for me, I’m very familiar with the Jewelry Making Pin Backs since I got it from 4 years.

Top 10

No. 1
Shappy 100 Pieces Bar Pins Brooch Pin Backs Safety Clasp with Plastic Box, 4 Sizes 20 mm, 25 mm, 32 mm and 38...
  • Package: includes totally 100 pieces bar pins in 4 sizes (20 mm: 30 pieces, 25 mm: 30 pieces, 32 mm: 20 pieces, and 38 mm: 20 pieces)
  • Easy to attach: these pin backs with 2 or 3 holes, and their backs are flat, so you can stick the attached crafts with glue, or sew the hole directly
  • Secure safety pin backs: with annular bayonet design, not easy to drop and fall apart; Stainless steel plated, not easy to get rusty
  • DIY crafts accessory: brooch backs are good for attaching beads, dangles and various jewellery findings to create an unique and personalized ornaments
  • More uses: pin backs can be glued onto most surfaces to DIY crafts, suitable for jewel crafting, sewing fabric, making corsage, name badges and more
No. 2
eBoot Tie Tacks Blank Pins with PVC Rubber Pin Backs (100)
  • Pins size: 10 mm in diameter, 9 mm in length; Material: PVC rubber and nickel plated brass; Rubber pin keeper size: 12 mm in diameter, 7 mm in height
  • Practical shape: protruding half round shape handle on the pin back is designed for easy grasp, thus you can be convenient to take on
  • Tight rubber pin back: the PVC pin back is tight and they are not easy to fall off; Each pin back has a hole which is compatible with the tie tack pin
  • Multiple purpose: good for jewelry making; You also can use the tie back to fix object, such as photos, fabrics, cloth, map, scrapbook, etc.
  • Replacement for the lost pin back: can be the pin clutch backs, fits for all lapel pins, tie tacks, citation bars, service bars and jewelry
No. 3
Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags...
  • Material: Metal; Color: Silver. Length: 0.75”/20mm.
  • Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create...
  • These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair...
  • Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration.
  • Package includes: 30pcs * brooch safety pin backs clasps.
No. 4
120 Pairs Butterfly Clutch Tie Tacks Pin Back Replacement with 8mm Length Blank Pins for Craft Making, Silver
  • No tools required: Butterfly clutch with spring fastener slices allow you to install and remove it easily, handy and convenient for use.
  • Tie tacks: Clutch backs size is 11 mm in diameter;pins size is 4.5 mm in diameter, 8 mm in length , with silver color, small and low profile.
  • Versatile: Blank pins and clutch back can be applied to make tie tacks, badge insignia, citation bars, service bars and jewelry making, etc.
  • Sturdy and durable: Clutch backs and blank pins are made of nickel plated brass, sturdy and light, lock pins firmly and keep them .secure
  • Good for keep tie in place, make some DIY crafts.
SaleNo. 5
100 Pairs Butterfly Clutch, CBTONE Silver Metal Tie Tacks Pin Backs Replacement with Blank Pins for Craft...
  • Durable & Secure - Tie tacks is made of nickel plated brass. Metal material makes it anti-wear. And these are incredibly sturdy and secure.
  • Replaceable - The package including 100 pairs tie tacks, enough for replacement to your torn or lost one, also good supplies for making DIY crafts.
  • Size - The blank pins size is 4.0 mm in diameter, 8 mm in length; Clutch backs size is 11 mm in diameter. The gap between them is very small and tight clasp
  • Easy to use - No tools required, the Butterfly clutch with spring fastener slices allow you to install and remove it easily. Great for pins keeps a tight hold on them.
  • Widely used - The blank pins and clutch back can be applied to tie tacks, badge insignia, citation bars, service bars, name tag, toy pins, jewelry making, DIY crafts, etc.
No. 6
canomo 50 Pairs Butterfly Pin Backs with 15mm Tie Tacks Blank Pins for for Lapel Pins, Service Bars and...
  • Dimension: pins size is 15 mm in diameter, 9 mm in length; Clutch backs size is 11 mm in diameter
  • The blank pins are bigger than the normal pins, provide more contact area as you make jewelry or lapels. Sturdy and don't worry to lost your favors
  • Material: nickel plated brass
  • Easy to use: no tools required, butterfly clutch with spring fastener allow you to install and remove it easily, handy and convenient for use
  • 50 set of tie tacks, enough for replacement to your torn or lost backs badges, name tags, etc., also good for making DIY crafts, wedding flower lapel pin
No. 7
YuCool 60 Pack Butterfly Clutch with Blank Pins, Pin Backs Tie Tacks Replacement for Craft&Jewelry Making-(30...
  • Great Packages:2 colors of 60 set butterfly clutch and blank pins,30 Silver and 30 Gold
  • Butterfly clutch: Diameter:11.5mm/0.43in;Blank pins diameter:10mm/0.4in,height:9mm/0.35in
  • Great Material:Nickel plated brass,small,sturdy and Light.Lock pins firmly.Durable And Sturdy
  • OPERATION:Butterfly clutch with spring fastener slices allow you to install and remove it easily,handy and convenient for use
  • Widely Use:It can be used to make tie tacks,badge insignia,citation bars,service bars and jewelry making,etc
SaleNo. 8
SUBANG 40 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
  • Package Contents: 40 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing; each pin sizes is approx. 1 cm in diameter and 0.7 cm in height.
  • Quality Material: pin backs are made of quality nickel-plated copper, small and sturdy; The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience; The small...
  • Delicate Design: the pin backs match for most metal pin; Metal pin backs provides good grip of pin to keep it stay in place; Its firm and protective grip assures that you will never lose another pin.
  • Easy Use: these pin keepers are easy to put on and take off without a tool; Simply push to secure onto pin post while holding onto your pin to release; These locking pin backs are very smooth.
  • Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests,...
No. 9
BEADNOVA Locking Pin Keeper Back for Hat Back Pack Label Pins Jewelry Making Back for Pin (20pcs, Allen Wrench...
  • PIN KEEPER SIZE: Our pin keepers are 5.5 mm/ 0.2 inch in diameter, 9 mm/ 0.35 inch in height. Come with the pack 2pcs Allen wrench approximately 4.5 cm/ 1.8 inch in length. All our pin locks are well made...
  • DURABLE PIN LOCK: Made of nickle-plated brass material, the pin keeper is durable and resistant to rust and fade. You can use the pin locking clasp a period of time.
  • PACK INCLUDES: 20pcs pin keepers and 2pcs Allen wrench. You get all you need to keep you pins in place.
  • WIDE USEAGE: Our pin keeper is suitable for locking pin backs, Disney locking pin, as pin back for insignia, name tag, lanyards, bags, hats, badge. Use pin keeper to secure pins on leather, vest, jacket,...
  • EASY TO USE: Put a pin keeper in the back of the pin. Use the provided Allen wrench to secure the pin and pin back tight. Just two easy steps to attach the pin lock, and you never have to worry losing your...
SaleNo. 10
300 Pairs 5MM 6MM 8MM Hypoallergenic Stainless Steel Earrings Posts Flat Pad Blank Earring Pin Studs with 300...
  • ஐ【PACKAGE INCLUDES】300 pairs of 3 different size earring posts can meet your requirements, including 100 pairs 5mm earrings posts, 100 pairs 6mm earrings posts, 100 pairs 8mm earrings posts and 300...
  • ஐ【DIY MAKING】You can use your imagination to create your own earrings, just use hot liquid glue to stick the beads or crystals on the earrings post flat pad. You can even share that fun with your...
  • ஐ【UNIQUE GIFT】Those earring findings for jewelry making can be gifts for family and friends. You can make Unique DIY earrings on Party,Birthday,Valentine's Day,Mother's Day, Teacher's Day
  • ஐ【MATERIAL AND SIZE】 The hypoallergenic earring posts and backs are made of stainless steel; safe, non-toxic. Earrings posts length: 12mm. 3 sizes flat pad diameter: 5mm 6mm 8mm, pin thickness 0.7mm....
  • ஐ【WIDELY APPLICATION】The earring posts and backs are best accessories for costume parties, punk party, fancy dress party, performance show ect., also perfect for weddings gifts, decoration and...

How we tested

We search all the field to find the best Jewelry Making Pin Backs and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Jewelry Making Pin Backs from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Jewelry Making Pin Backs and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Jewelry Making Pin Backs from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
SUBANG 40 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
  • Package Contents: 40 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing; each pin sizes is approx. 1 cm in diameter and 0.7 cm in height.
  • Quality Material: pin backs are made of quality nickel-plated copper, small and sturdy; The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience; The small...
  • Delicate Design: the pin backs match for most metal pin; Metal pin backs provides good grip of pin to keep it stay in place; Its firm and protective grip assures that you will never lose another pin.
  • Easy Use: these pin keepers are easy to put on and take off without a tool; Simply push to secure onto pin post while holding onto your pin to release; These locking pin backs are very smooth.
  • Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests,...
SaleNo. 2
100 Pairs Butterfly Clutch, CBTONE Silver Metal Tie Tacks Pin Backs Replacement with Blank Pins for Craft...
  • Durable & Secure - Tie tacks is made of nickel plated brass. Metal material makes it anti-wear. And these are incredibly sturdy and secure.
  • Replaceable - The package including 100 pairs tie tacks, enough for replacement to your torn or lost one, also good supplies for making DIY crafts.
  • Size - The blank pins size is 4.0 mm in diameter, 8 mm in length; Clutch backs size is 11 mm in diameter. The gap between them is very small and tight clasp
  • Easy to use - No tools required, the Butterfly clutch with spring fastener slices allow you to install and remove it easily. Great for pins keeps a tight hold on them.
  • Widely used - The blank pins and clutch back can be applied to tie tacks, badge insignia, citation bars, service bars, name tag, toy pins, jewelry making, DIY crafts, etc.
SaleNo. 3
Baker Ross Self-Adhesive Badge Pins Brooch Backs - Jewelry Making Kids Craft Supplies (Pack of 20)
  • Make your own badges with these self-adhesive badge pins.
  • 1.18 inches (30mm) wide
  • Adult supervision recommended.
SaleNo. 4
Earring Posts Stainless Steel 600Pcs Hypoallergenic Flat Pad Earring Studs with Butterfly and Rubber Bullet...
  • Package Include:Comes with 2 different sizes of earring posts, including 100 pieces 4mm earring pin studs, 100 pieces 6mm earring pin studs, 200 pieces butterfly earring backs and 200 pieces rubber...
  • High Quality:Both the jewelry posts and the butterfly earring backings are made of stainless steel, durable and not rusty. The clear bullet earring backs are made of rubber.
  • DIY Making:These earring stud blanks provide you a lot of possibilities. Just use hot liquid glue to stick gems or rhinestones on the earrings post flat pad, then you will get your own beautiful...
  • Wide Application:These earring findings for jewelry making are suitable for daily use, parties and activities, they are prefect gifts for your friends and family members.You can also use them for...
  • Good Replacement:Our flat pad earring studs are sturdy and easy to use, please heat and rub the studs with alcohol before use. Earring backs fit to most of earrings, it is a good replacement for your...
SaleNo. 5
150Pcs Ball Post Earring Studs for Jewelry Making,Earring Studs Ball Ear Pin Ball Post Earrings with Loop with...
  • ❤Ball Post Earring Studs:The package comes with 150Pcs spherical earrings and 200Pcs Rubber Earring Safety Backs,350Pcs in total,the studs come with backings,you don't need to buy separately,if you need...
  • ❤Great for earring making:Earrings backs fit to most of the earrings studs;They are the good replacement for your lost earring back and earring post.if you need any others earring accessories,you could...
  • ❤Stainless steel earrings post studs:Made of durable metallic material without lead, nickel and cadmium, anti-sensitive and safe to wear.Earring Posts with ball about 5mm in diameter,15mm in Length,hole...
  • ❤Why you need this Ball Stud Earrings?:Anytime you are busy or leisurely or happy or upset,go to make DIY Earring Jewelry,it would make you relaxed,concentrate on designing your own jewelry,Be you, just...
  • ❤Quality Service:We stand behind our brand provide 100% full money back Service. If, for whatever reason, you don't absolutely love your Ball Post Earring Studs Set, just contact us and we will do...

Conclusion

This guide is here to support you in your choice of Jewelry Making Pin Backs and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Jewelry Making Pin Backs according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2020-09-18 at 07:04 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment