Essential Guide of Power Router Fences – January 2021 Edition

Looking to find the best Power Router Fences?

We researched 28 Power Router Fences, tested 25, and we have done 24 hours of research. The best Power Router Fences doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
SUPREME ROUTER TABLE FENCE KIT By Peachtree Woodworking - PW1073
  • Kit Includes: (1) 32" pre-drilled aluminum fence, (1) pair 16" aluminum fence sections
  • (1) pair dust port mounting blocks, (1) router dust port. (1) small plastic featherboard
  • (1) Uni-fence stop block, (6) 1/4" x 20 knob and bolts.
  • Fence will accommodate bits up to 3-1/2" in diameter.
  • The dust port system allows you to attach a 2-1/2" Shop Vacuum hose directly to the back of the fence.

Intro

Here’s your guide to choosing the best Power Router Fences. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Power Router Fences of different brands and prices based on the best value for money. This ranking was created to help you find the best Power Router Fences depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Power Router Fences that’s right for you!

Our picks

No. 1
SUPREME ROUTER TABLE FENCE KIT By Peachtree Woodworking - PW1073
  • Kit Includes: (1) 32" pre-drilled aluminum fence, (1) pair 16" aluminum fence sections
  • (1) pair dust port mounting blocks, (1) router dust port. (1) small plastic featherboard
  • (1) Uni-fence stop block, (6) 1/4" x 20 knob and bolts.
  • Fence will accommodate bits up to 3-1/2" in diameter.
  • The dust port system allows you to attach a 2-1/2" Shop Vacuum hose directly to the back of the fence.
SaleNo. 2
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • Pre-load tension design maintains consistent pressure across face of the feather board
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
No. 3
32" L Table Fence Pre-drilled By Peachtree Woodworking - PW1098
  • L Shaped aluminum ready to mount on the router table or other setups
  • 32" Fence has two 1/4" slots for mounting & center hole cut out
  • Can mount on a drill press table, router table, band saw fence & many other tools
  • Also available in 24" (Sold separately)
  • Can be used with all kinds of shop built jigs & tables

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 24 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Power Router Fences information.
As for me, I’m very familiar with the Power Router Fences since I got it from 4 years.

Top 10

No. 1
SUPREME ROUTER TABLE FENCE KIT By Peachtree Woodworking - PW1073
  • Kit Includes: (1) 32" pre-drilled aluminum fence, (1) pair 16" aluminum fence sections
  • (1) pair dust port mounting blocks, (1) router dust port. (1) small plastic featherboard
  • (1) Uni-fence stop block, (6) 1/4" x 20 knob and bolts.
  • Fence will accommodate bits up to 3-1/2" in diameter.
  • The dust port system allows you to attach a 2-1/2" Shop Vacuum hose directly to the back of the fence.
SaleNo. 2
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • Pre-load tension design maintains consistent pressure across face of the feather board
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
No. 3
32" L Table Fence Pre-drilled By Peachtree Woodworking - PW1098
  • L Shaped aluminum ready to mount on the router table or other setups
  • 32" Fence has two 1/4" slots for mounting & center hole cut out
  • Can mount on a drill press table, router table, band saw fence & many other tools
  • Also available in 24" (Sold separately)
  • Can be used with all kinds of shop built jigs & tables
No. 4
JessEm 4010 Master Fence II
  • Heavy duty aluminum extruded fence frame
  • Fully adjustable fence faces with quick locking knobs
  • Side mounted fence tracks with built in scales
  • Tool free fence adjustments
  • 1/32" and 1/16" shimming/offset bars standard
No. 5
DELUXE ROUTER TABLE FENCE KIT by Peachtree Woodworking - PW1072
  • Kit Includes: (1) 32" pre-drilled aluminum fence, (1) pair MDF 16" fence sections
  • (1) pair dust port mounting blocks, (1) router dust port. (1) small plastic featherboard
  • (1) fence stop block, (6) 1/4" x 20 knob and bolts, (1) pair mini T-track for fence mounting.
  • Fence will accommodate bits up to 3-1/2" in diameter.
  • The dust port system allows you to attach a 2-1/2" Shop Vacuum hose directly to the back of the fence.
No. 6
JessEm Mast-R-Fence III Router Table Fence
  • Red phenolic base creates a solid platform with a 100% flat surface
  • Machined 6061 aluminum extrusion components with black anodized finish
  • Fence face shimming bars fitted for an offset fence face marked as 1/32" and 1/16"
  • Dust port fitting is designed to accept most shop vacuums hoses
No. 7
32" Deluxe Router Table Fence by Peachtree Woodworking PW3319
  • 2 MDF fence plates supported by solid aluminum "L" fence
  • Built in t-track
  • Accommodates router bits up to 3 1/2" in diameter
  • System equipped with a dust port the envelopes the opening between the 2 MDF fence sections
  • Tall adjustment knobs allow easy access for moving your fence forward and backward.
No. 8
Boloniprod 2 Pack Featherboard True-FLEX Featherboard Double Feather Loc Board Adjustable Woodworking Safety...
  • Boloniprod true-flex feather board gets its name from the careful engineering that went into its design. This unique featherboard can be quickly and easily connected to a miter slot or t-slot without the...
  • Many feather boards on the market apply too much or too little pressure to the work piece resulting in imperfect cuts and less than safe operation
  • We've designed each finger of the true-flex feather board to provide consistent and optimum pressure and to stand up to years of use in your workshop
  • Boloniprod true-flex feather board comes with wedge-lock hardware which works in T-slots or miter slots on table saws, Router tables, band saws and more.
  • Boloniprod True-FLEX Featherboard comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
No. 9
24" L Table Fence Pre-drilled By Peachtree Woodworking - PW1097
  • L Shaped aluminum ready to mount on the router table or other setups
  • 24" Fence has two 3/8" slots for mounting
  • Can mount on a drill press table, router table, band saw fence & many other tools
  • Also available in 32" (Sold separately)
  • Can be used with all kinds of shop built jigs & tables
No. 10
Fence Backer Boards By Peachtree Woodworking - PW1093
  • MDF Fence makes great fences for router table & other too
  • Make you own brackets or use our aluminum fence blank (Sold Separately)
  • The following is included:
  • 2- 16" x 4" MDF Fence Plates with Mini-T-Track installed front & back
  • 4 Knobs & 4 ea 1/4" hex head bolts for installation

How we tested

We search all the field to find the best Power Router Fences and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Power Router Fences from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Power Router Fences and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Power Router Fences from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • Pre-load tension design maintains consistent pressure across face of the feather board
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
SaleNo. 2
Delta, 36-T30T3, 30 in. DELTA T3 Fence System
  • One piece square tubular rail. Max Rip to Left of Blade-13-1/2 inch. Length: Fence 37 inch, Rail 57-1/2 inch
  • Mounting design attaches to Delta table saws including Contractor Saw , Hybrid Saw , and Unisaw models
  • Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0. 4mm)
  • Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts
  • Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments
SaleNo. 3
Clound city FeatherBoard for Router Tables, Table Saws and Fences (yellow)
  • Widths Miter Bars and t-slot bolts are applicable for most standard miter slots. And associated with wedge-lock hardware and split rail miter bar construction provide maximum hold for bandsaw table, router...
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Advanced design means no marring to your workpiece
  • A dramatic increase the ACCURACY, QUALITY and SAFETY of the cuts.

Conclusion

This guide is here to support you in your choice of Power Router Fences and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Power Router Fences according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-01-27 at 23:05 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment