Essential Guide of Powersports Handlebar Risers – %currentmonth% %currentyear% Edition

Looking to find the best Powersports Handlebar Risers?

We researched 12 Powersports Handlebar Risers, tested 10, and we have done 23 hours of research. The best Powersports Handlebar Risers doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

SaleNo. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide

Intro

Here’s your guide to choosing the best Powersports Handlebar Risers. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Powersports Handlebar Risers of different brands and prices based on the best value for money. This ranking was created to help you find the best Powersports Handlebar Risers depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Powersports Handlebar Risers that’s right for you!

Our picks

SaleNo. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide
SaleNo. 2
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
No. 3
Rox Speed FX 2in. Pivoting Riser for 7/8in. Handlbar - Natural Aluminum 1R-P2SSN
  • Patented design Pivoting Risers are incredibly universal with a twopiece design that allows them to be clamped to any motor vehicle with 7/8in. handlebar clamps
  • Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
  • Out-board positioning also makes them incredibly durable
  • Available in black or new natural aluminum finish

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 23 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Powersports Handlebar Risers information.
As for me, I’m very familiar with the Powersports Handlebar Risers since I got it from 3 years.

Top 10

SaleNo. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide
SaleNo. 2
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
No. 3
Rox Speed FX 2in. Pivoting Riser for 7/8in. Handlbar - Natural Aluminum 1R-P2SSN
  • Patented design Pivoting Risers are incredibly universal with a twopiece design that allows them to be clamped to any motor vehicle with 7/8in. handlebar clamps
  • Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
  • Out-board positioning also makes them incredibly durable
  • Available in black or new natural aluminum finish
SaleNo. 4
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
No. 5
kemimoto 7/8" Handlebar Risers 30mm Height for KLR650 ATV Dirt Bike (Black)
  • Perfect Fit for 7/8 inch Handlebars; NOT FIT FOR 1" or 1 1/8" (They are available in our shop too), or 1 1/4". Please Make Sure the Size of Your Handlebar before Placing Order. There is "Application Manual " at Technical Specification
  • Adaptation - These motorcycle handlebar risers fit almost all Dirt Bikes and Atv with 7/8" handlebars. Such as KLR 650, ATV, Dirt Bike, F650GS F800ST, etc.
  • High Quality - Our 7/8" risers are made from high-quality CNC aluminum with anti-rust bolts. Extend height, 30mm(1.2 inches)
  • Provide Comfortable - Extend 30mm(1.2 inches) height to provide you a comfortable riding position. Fits well and easy to install.
  • Risers allow you to change the location of the handlebars very easily, raising them up and pulling them back towards you more. Allowing for a more natural and comfortable riding position.
No. 6
Pivoting Handlebar Clamp Risers - APE Racing Billet Aluminum Universal Motorcycle 2" Raise Clamps For 7/8" or 1 1/8" Handlebars Mount To 7/8" Stem Clamp
  • ✔️HEAVEY DUTY - Made of billet 6061-T6 aluminum with completely CNC machined, hard anodized and blasting surface treatemt. We DON'T USE CASTING aluminum.
  • ✔️POLYMER ADAPTERS - APE Racing featured handlebar adapter made by high performance polymer which gives you the option of using either 7/8"(with adapter) bars or 1-1/8"(without adapter) taper bars.
  • ✔️RELIABLE AND DURABLE - APE Racing risers are designed for tough application. Each riser have 4 high grade stainless steel bolts to make sure max life time and safety.
  • ✔️FITMENT - 2 inch raise height; Fit for any machine with 7/8" bar clamps. ⚠️Please check the right size before purchase.
  • ✔️INCLUDES - 1 pair pivoting handlebar riser with adapters and 1 L-key wrench. Shipped in APE RACING retail packaging.
No. 7
XKH- Black Shorty ROUND 1" Handlebar Riser Compatible with Harley Kawasaki Suzuki Yamaha [B011WPASFS]
  • Motorcycle Specification: Overall height 2 7/8", bar size 1", overall Diameter at head 1 7/8", height from base to center of handlebar 2 ", overall diameter at base 1 1/8 ", thread at base 1/2" coarse (13 threads/inch). new
  • EASY INSTALL , No installation guide
  • color : the same like pictures show
  • 100% brand new
  • Fitment: All Harley Davidson ,Cruisers ,Choppers ,Metrics with 2.5cm bar diameter , All Victory cruisers with 2.5cm bar diameter , , yamaha , kawasaki ,suzuki ….
No. 8
PowerMadd 45419 Black Handlebar Risers
  • Universal fit
  • One piece design
  • Made of solid aluminum for superior strength
  • dual pivot points provide optimum bar positioning
  • Two models available - 7/8" to 7/8" for standard bars and 7/8" to 1 1/8" for converting to oversize bars
No. 9
NEVERLAND 7/8" Handlebar Risers 30mm Height for Kawasaki Honda Suzuki Yamaha Ducati ATV Dirt Bike Black
  • Feature:Handlebar Supports with 30MM height,CNC-machined from high-strength aluminium alloy Premium quality, anodized surface finish
  • Fitment For most bikes with 22mm (7/8") diameter handlebars, these will raise your handlebars by 30mm.such as Kawasaki Honda Suzuki Yamaha Ducati and so on
  • Easy to install,No need to replace your handlebars for a more upright position
  • Heavy Duty- The handlebar risers are made from strong sturdy and reliable anti-rust 6063-T6 Aluminum material
  • 100% Satisfaction Service- If there any problems with the products, reach out to us for a quick solution. If there is any question, please feel free to reach out to us.
No. 10
Springer Front End Riser Handlebar Tree Adapter Converter Fit Harley Bobber Chopper 4-3/4" to Standard 3-1/2"
  • Adapter with front springer forks and adapts 4-3/4" riser holes to standard 3-1/2".
  • Fitment: aftermarket springer fronts designed to fit on Harley Davidson like DNA, Paughco, MID-USA, and Hard Drive Springers.
  • NOTE: This can not FIT a OEM Harley Davidson springer front end.Check the Desired handlebar thread pitch before install.
  • Made from CNC Machines Billet High Strength Steel with Chrome Finish
  • Package Included: 1x Handlebar Tree Adapter,does not include screws.

How we tested

We search all the field to find the best Powersports Handlebar Risers and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Powersports Handlebar Risers from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Powersports Handlebar Risers and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Powersports Handlebar Risers from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
SaleNo. 2
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
SaleNo. 3
Handlebar Risers, 22mm 7/8inch Universal Motorcycle Handle Bar Riser Handlebar Clamp Back Move Mount Adapter Accessory Kit(Black)
  • Fit for- Universal fit for most of motorcycle, such as fit for Honda, fit for Yamaha, fit for Ducati, fit for Kawasaki, fit for Indian.
  • Increased by 30mm-This product can increase the height of the handlebars by 30mm, so that the rider has a more comfortable riding posture, effectively reducing the fatigue of long distance riding.
  • Move backward 20mm- Handle Bar Mount Clamp can move the handlebar backward 20mm, enhance the mobility of the motorcycle and improve steering sensitivity.
  • High quality material- Designed and developed with superior aluminum alloy, high-quality anodized surface treatment, anti-rust, corrosion-resistant, durable
  • Easy to install and use-without complicated instructions, remove the old one and put the new one to tighten the screws. Please feel free to contact us if you meetany trouble in using our product.
SaleNo. 4
Pro Taper 1-1/8 Inch Universal Rubber Mount Kit for Honda CR CRF Kawasaki KX
  • Pro-Taper Universal Rubber Mounted Handlebar Mount Kit
  • Fits 1-1/8 Inch bars
  • Designed to replace the stock 7/8 Inch barmounts on newer CR/CRF-KX-KXF-RM-RMZ-YZ YZF models with rubber-mounted through-bolted barmounts
  • Will not fit top triple clamps where the top barmount is cast into the top triple clamp.
SaleNo. 5
Handlebar Riser, 0.87in Handlebar Riser Mount Can Raise the Handlebar Height by 1.18in and Move Backwards by 0.79in, to Allow the Rider to Have a More Comfortable Riding Posture(Plating)
  • High quality: The 22mm handlebar riser adopts CNC aluminum alloy material, high quality anodized surface treatment, anti-corrosion and durable
  • Raise height by 30mm: The handlebar riser can raise the handlebar height by 30mm and move backwards by 20mm
  • More comfortable: Allow the rider to have a more comfortable riding posture, effectively reducing the fatigue of long-distance riding
  • Enhance sensitivity: The handlebar riser mount can enhance the maneuverability of the motorcycle and increase steering sensitivity
  • Easy to install: No complicated guidance required, universally fit for most of the motorcycles

Conclusion

This guide is here to support you in your choice of Powersports Handlebar Risers and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Powersports Handlebar Risers according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-06-22 at 13:54 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment