Looking to find the best RV Freshwater Tanks Inlets?
We researched 13 RV Freshwater Tanks Inlets, tested 11, and we have done 24 hours of research. The best RV Freshwater Tanks Inlets doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.
The best
No. 1 
RecPro RV Water Tank | Gray Water Tank | RV Fresh Water Tank | Camper | Trailer (40 Gallon) | Made in America
- Made in America
- Please be sure to clean tanks before use
- All tanks have been pressure tested
Intro
Here’s your guide to choosing the best RV Freshwater Tanks Inlets. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the RV Freshwater Tanks Inlets of different brands and prices based on the best value for money. This ranking was created to help you find the best RV Freshwater Tanks Inlets depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the RV Freshwater Tanks Inlets that’s right for you!
Our picks
No. 1
RecPro RV Water Tank | Gray Water Tank | RV Fresh Water Tank | Camper | Trailer (40 Gallon) | Made in America
- Made in America
- Please be sure to clean tanks before use
- All tanks have been pressure tested
No. 2
A.A Fresh Water Tank Accessory Hose Connection Kit - RV, Concession, Trailer, Camper
- This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
- (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
- (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
- Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.
No. 3
A.A 30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
- This 30 gallon water tank measures 34" x 18" x 12" (not including fittings)
- All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented
- One piece seamless construction - No Seams to burst
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
Why you should trust us
This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 24 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed RV Freshwater Tanks Inlets information.
As for me, I’m very familiar with the RV Freshwater Tanks Inlets since I got it from 3 years.
Top 10
No. 1
RecPro RV Water Tank | Gray Water Tank | RV Fresh Water Tank | Camper | Trailer (40 Gallon) | Made in America
- Made in America
- Please be sure to clean tanks before use
- All tanks have been pressure tested
No. 2
A.A Fresh Water Tank Accessory Hose Connection Kit - RV, Concession, Trailer, Camper
- This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
- (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
- (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
- Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.
No. 3
A.A 30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
- This 30 gallon water tank measures 34" x 18" x 12" (not including fittings)
- All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented
- One piece seamless construction - No Seams to burst
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
No. 4
Class A Customs | T-1000 | One (1) RV Fresh Water 10 Gallon Tank, Grey Water
- 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
No. 5
Automotive Authority LLC 1.25" Fill Hose with Flats for RV Concession Fresh Water Tank - Marine, Boats, Campers, Trailer, RVs, Concession (3 Feet)
- 1-1/4" ID Fill Hose with Flats (3 Foot Length) - The last picture shows a 10 ft roll and does not represent shorter lengths - The length will be within +/- 3"
- This 1-1/4" hose with flats is to be used with hose clamps to connect RV gravity water fill with the RV water tanks (no clamps included). The flats allow for easy clamping.
- Made from ethylene copolymer (great flexibility with no kinking)
- IAPMO approved, Heavy duty construction
- For lengths shorter than 10 ft we can not gaurantee flats on both ends
No. 6
RecPro RV 45 Gallon Fresh Water Holding Tank for Campers, Trailers and RV Tank with Sensors | Made in America
- The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties
- Blow-molded HDPE tanks are an integral component to all recreational vehicles
- Tanks are built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association
- 27.7 Width x 53.5 Length x 7.5 Height Holding Tank 45 - Gallon, Blow-molded with 3 Inch Coupling
- Made in America
No. 7
A.A 1-3/8" Fill Hose with Flats for RV Concession Fresh Water Tank - Marine, Boats, Campers, Trailer, RVs, Concession (3 Feet)
- 1-3/8" ID Fill Hose with Flats (3 Foot Length) - The last picture shows a 10 ft roll and does not represent shorter lengths - The length will be within +/- 3"
- This 1-3/8" hose with flats is to be used with hose clamps to connect RV gravity water fill with the RV water tanks (no clamps included). The flats allow for easy clamping.
- Made from ethylene copolymer (great flexibility with no kinking)
- IAPMO approved
- Heavy duty construction
No. 8
Class A Customs | T-2500 | One (1) RV Fresh Water 25 Gallon Tank, Grey Water
- 25 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 33 1/2” Longest Length (not including fittings) x 10” x 17” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
SaleNo. 9
Valterra A01-0035VP Secure-Fill Hands Free Water Tank Filler with Brass Shut-Off
- fit type: Universal Fit
No. 10
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
How we tested
We search all the field to find the best RV Freshwater Tanks Inlets and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great RV Freshwater Tanks Inlets from the good.
- Easy To use
- Options
- Quality
- Longevity
How we picked
We search for all the field to find the best RV Freshwater Tanks Inlets and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad RV Freshwater Tanks Inlets from the good.
- Price
- Easy To use
- Customer reviews
- Quality
- Longevity
- Dimensions
Current Offers
SaleNo. 1
Valterra A01-0035VP Secure-Fill Hands Free Water Tank Filler with Brass Shut-Off
- fit type: Universal Fit
SaleNo. 2
JR Products (160-85-A-3P-A Black City Water Flange
- Plastic check valve with 1/2" MPT
- Direct OEM replacement
- UV and impact resistant
- Cutout Dimensions: 1-1/2" diameter; Outside Dimensions: 3"
- Valve Depth: 1-11/16"
Conclusion
This guide is here to support you in your choice of RV Freshwater Tanks Inlets and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best RV Freshwater Tanks Inlets according to your criteria. Your comments are most welcome and they will help us improve the ranking.
Click to rate this post!
[Total: 0 Average: 0]
Last update on 2022-05-28 at 00:04 / Affiliate links / Images from Amazon Product Advertising API