Essential Guide of Sculpture Release Agents – October 2020 Edition

Looking to find the best Sculpture Release Agents?

We researched 25 Sculpture Release Agents, tested 20, and we have done 30 hours of research. The best Sculpture Release Agents doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
CRC 03301 Food Grade Silicone Mold Release, (Net Weight: 11.5 oz.) 16oz Aerosol Spray,Clear
  • Colorless, odorless, non-staining and non-corrosive
  • Helps produce more parts in less time
  • Light duty silicone content of 3 percent
  • NSF M1 registered
  • Meets FDA regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact)

Intro

Here’s your guide to choosing the best Sculpture Release Agents. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Sculpture Release Agents of different brands and prices based on the best value for money. This ranking was created to help you find the best Sculpture Release Agents depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Sculpture Release Agents that’s right for you!

Our picks

No. 1
CRC 03301 Food Grade Silicone Mold Release, (Net Weight: 11.5 oz.) 16oz Aerosol Spray,Clear
  • Colorless, odorless, non-staining and non-corrosive
  • Helps produce more parts in less time
  • Light duty silicone content of 3 percent
  • NSF M1 registered
  • Meets FDA regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact)
No. 2
Smooth-On Universal Mold Release 14 fl. oz.
  • Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.
  • Universal Mold Release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.
  • It will release mold rubbers from properly prepared models and easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds.
  • Using a silicone rubber mold without release agent limits the production life. Universal mold release will more than double the production life of the mold if you are casting urethane resin.
  • If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.
No. 3
Akua IIRA Speedball Mono Liquid Pigment Release Agent, 8 oz. Bottle
  • Releases liquid pigment from the plate to paper
  • Used for high shine with metallic inks, monotype ghost prints or while doing monotype prints with Akua liquid pigment
  • Helps to soften metallic inks so it can easily transfer onto the paper
  • Looks white but rolls up clear and colorless
  • Sold as an each

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 30 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Sculpture Release Agents information.
As for me, I’m very familiar with the Sculpture Release Agents since I got it from 5 years.

Top 10

No. 1
CRC 03301 Food Grade Silicone Mold Release, (Net Weight: 11.5 oz.) 16oz Aerosol Spray,Clear
  • Colorless, odorless, non-staining and non-corrosive
  • Helps produce more parts in less time
  • Light duty silicone content of 3 percent
  • NSF M1 registered
  • Meets FDA regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact)
No. 2
Smooth-On Universal Mold Release 14 fl. oz.
  • Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.
  • Universal Mold Release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.
  • It will release mold rubbers from properly prepared models and easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds.
  • Using a silicone rubber mold without release agent limits the production life. Universal mold release will more than double the production life of the mold if you are casting urethane resin.
  • If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.
No. 3
Akua IIRA Speedball Mono Liquid Pigment Release Agent, 8 oz. Bottle
  • Releases liquid pigment from the plate to paper
  • Used for high shine with metallic inks, monotype ghost prints or while doing monotype prints with Akua liquid pigment
  • Helps to soften metallic inks so it can easily transfer onto the paper
  • Looks white but rolls up clear and colorless
  • Sold as an each
SaleNo. 4
Mann Release Technologies Ease Release 200 14 fl. oz.
  • 14 fl. oz. Aerosol Clear Mold Release Spray
  • Will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers
  • Excellent release. Effective on urethane, silicone and metal molds
  • Easy to Apply. Fast Drying.
  • Effective over a broad temperature range from 70°F to 500°F
No. 5
Mold Release | Stoner E236 Urethane Release (Case of 12 Aerosol Cans)
  • Case of (12) Aerosol Cans
  • Silicone Oil Based Release - Very Effective Releasing
  • Great for cast Urethanes
  • Extends Silicone Mold Life
  • Colorless and Non Staining
No. 6
Sprayway SW946 Silicone Spray and Release Agent, 11 oz
  • Makes tables and other areas slippery, allowing your fabric to sail over the surface smoothly
  • Spray on metal, glass, rubber or plastic quilting surfaces, even painted finishes and fabric
  • Protects material and preserves equipment
  • Heat-stable silicone release agent
  • NSF registered
No. 7
Polytek Pol-Ease 2500 Release Agent (Case of 12 cans)
  • Can be washed off models and castings if they need to be painted
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers).
  • Apply to silicone rubber molds when casting liquid silicone rubber
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life)
  • Apply to polyurethane molds before casting polyurethane liquid plastics
No. 8
Orca Shimmer Mold Release Compound High Gloss Paste Wax
  • carnauba-based paste wax
  • designed for the fiberglass molder
  • resistant to abrasion
No. 9
PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon
  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be...
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against mold hang ups with polyester and vinyl-ester resins; also used with epoxy and urethane resins
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.)
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
No. 10
ISOKOTE 1000 Silicone Release Agent
  • Silicone Release Agent
  • Suitable for polyurethanes, epoxies, polyester resins and silicone rubbers
  • Low viscosity, good wetting wction and spreads uniformly
  • CANNOT BE SHIPPED TO CALIFORNIA**

How we tested

We search all the field to find the best Sculpture Release Agents and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Sculpture Release Agents from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Sculpture Release Agents and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Sculpture Release Agents from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
Mann Release Technologies Ease Release 200 14 fl. oz.
  • 14 fl. oz. Aerosol Clear Mold Release Spray
  • Will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers
  • Excellent release. Effective on urethane, silicone and metal molds
  • Easy to Apply. Fast Drying.
  • Effective over a broad temperature range from 70°F to 500°F

Conclusion

This guide is here to support you in your choice of Sculpture Release Agents and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Sculpture Release Agents according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2020-10-31 at 17:14 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment