Essential Guide of Towing Bumper Hitches – May 2021 Edition

Looking to find the best Towing Bumper Hitches?

We researched 10 Towing Bumper Hitches, tested 9, and we have done 28 hours of research. The best Towing Bumper Hitches doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

Intro

Here’s your guide to choosing the best Towing Bumper Hitches. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Towing Bumper Hitches of different brands and prices based on the best value for money. This ranking was created to help you find the best Towing Bumper Hitches depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Towing Bumper Hitches that’s right for you!

Our picks

SaleNo. 2
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included grade-8 hardware and typically just a few tools
No. 3
Sulythw 2” Rear Bumper Towing Trailer Hitch Receiver Compatible with 2007-2018 Jeep Wrangler JK 2 Door & 4 Door Unlimited(Exclude 2018 JL Models) with Wiring Harness & Hitch Cover
  • 【Fits】Standard 2 inch square receiver and custom designed to be compatible with factory bumper of 2007-2018 Jeep Wrangler JK (Both 2 door & 4 door models.) Not compatible with 2018 JL Models.
  • 【Heavy Duty Towing Capacity】Sulythw 2007-2018 jeep wrangler jk trailer hitch with ratings of 3500lb gross trailer weight, 350 lb tongue weight.
  • 【High Protective Performance】This bumper kit is made of black powder coated for long lasting corrosion resistance.
  • 【Easy to Install】No drilling required, direct bolt-on Installation. All mounting hardwares and plug & wiring harness are included. The hitch cover could protect receiver tube from mud, dirt and pests when not in use.
  • 【100% Guarantee】Limited Lifetime Warranty against manufacturer defect! Order Now!!!

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 28 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Towing Bumper Hitches information.
As for me, I’m very familiar with the Towing Bumper Hitches since I got it from 5 years.

Top 10

SaleNo. 2
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included grade-8 hardware and typically just a few tools
No. 3
Sulythw 2” Rear Bumper Towing Trailer Hitch Receiver Compatible with 2007-2018 Jeep Wrangler JK 2 Door & 4 Door Unlimited(Exclude 2018 JL Models) with Wiring Harness & Hitch Cover
  • 【Fits】Standard 2 inch square receiver and custom designed to be compatible with factory bumper of 2007-2018 Jeep Wrangler JK (Both 2 door & 4 door models.) Not compatible with 2018 JL Models.
  • 【Heavy Duty Towing Capacity】Sulythw 2007-2018 jeep wrangler jk trailer hitch with ratings of 3500lb gross trailer weight, 350 lb tongue weight.
  • 【High Protective Performance】This bumper kit is made of black powder coated for long lasting corrosion resistance.
  • 【Easy to Install】No drilling required, direct bolt-on Installation. All mounting hardwares and plug & wiring harness are included. The hitch cover could protect receiver tube from mud, dirt and pests when not in use.
  • 【100% Guarantee】Limited Lifetime Warranty against manufacturer defect! Order Now!!!
No. 4
PMD Products RV 4" Bolt Bumper Hitch Mount Receiver Adapter 3500lbs Towing Cargo Bike Rack for Camper Motorhome
  • Steel welded construction works on 4" square RV Bumpers
  • 0.450" diameter U-Bolts, Powder-coated rust resistant finish, Zinc Plated Hardware
  • 3500lbs Gross Trailer weight, 350lbs Gross Tongue Weight Rating, Class II
  • Can mount above or below RV bumperCan mount above or below RV bumper
  • 2" Receiver Tube accepts ball mounts, bike racks, toters, cargo racks etc
No. 5
EPARTS Universal Ram SUV Pickup Truck Chrome Rear Heavy Duty Trailer Tow Towing Bumper Hitch Step Bar with LED Brake Light
  • Universal Fit For Most SUV / Pick-up Truck with 1.25" / 2" Hitch Receiver
  • High-Quality T-304 Stainless Steel With Non-Slip High Impact Step Pad
  • Built-in LED Brake Light Feature Gives Additional Visibility When Driving
  • Provides Easy Access To Truck Bed, Racks and Interior
  • Easy To Install; Direct Bolt-On with Pre-Wiring Plug And Play LED Light
No. 6
KAYCENTOP Hitch Step with Hitch Lock Towing Bumper Guard for Most Cars SUV Trucks Pickups with Pin Fits 2 inch Receivers Universal Anti Slip and Rust
  • ❤ PREMIUM MATERIAL --- This hitch step is made of solid iron with durable black ED coating + powder coat finish for long-lasting corrosion resistance. It offers all-weather protection for your car's bumper.
  • ❤ UNIVERSAL --- Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch; Step pad is 11-4/5” in length and 4” wide, 6” tube with 5 holes for adjustable length, Hitch hole 1/2 inch; Weight Capacity: 220 LBS.
  • ❤ APPLICABLE SCOPE --- To truck beds, roof racks and SUV interiors. Once secured, the hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.
  • ❤EASY INSTALLATION --- The black hitch lock can push to lock and open it key, which provides nice security for the bumper step that easy to install and remove.Package included: 1× Hitch Step; 1× 5/8" hitch Lock.
  • ❤ CLIENT SUPPORT --- 30 DAYS money back and 1 YEAR warranty, feel free to contact us for any issue.
No. 7
Bully BBS-1104L Black Bull Series Heavy-Duty Rugged Towing Truck SUV Bumpstep Hitch Step Protector with LED Brake Light Universal Fit Hitch Mount for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep
  • Provides Easy Access - to truck beds, roof racks and SUV interiors. Once secured, the lighted hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.
  • Lets Other Drivers See You - the lighted hitch cover features LED brake lights to provide added visibility for other drivers. When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights.
  • Sturdy, Ample Step- The 100% steel tube step measures 19” wide and 3.75” in diameter, with a high-impact, anti-skid step pad.
  • Universal Fit for Most Hitch Receivers - Fits 2” and 1-1/4” hitch receivers (includes reinforced plastic adapter), which are the most common sizes
  • Easy to Install - Installs in minutes/includes plug-and-play wire harness
No. 8
EAG RV Bumper Hitch 2 inches Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3, 500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • MATERIAL - Made of durable steel, glossy black powder coat finish.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
  • PACKAGE - Camper RV bumper hitch + zinc plated hardware.
No. 9
Towing Planet RV Bumper Hitch Receiver Adapter Mount for Bike Cargo Carrier, Bike Trailer Trailer Coachman for 4" Square Continuous Welded Cargo Carrier Bumpers RV Bumpers Cargo Carrier Bumpers
  • U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier tubes and bike trailer
  • Size:For 4" square continuous welded RV bumpers (can also work with bumpers 4.5" tall x 4.25" deep), accepts a 2" tube
  • Black powder coated steel with zinc plated hardware
  • (Warranty) Comes with 30 Days Money Back Guaranteed and Lifetime Warranty.
No. 10
CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.
  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays

How we tested

We search all the field to find the best Towing Bumper Hitches and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Towing Bumper Hitches from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Towing Bumper Hitches and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Towing Bumper Hitches from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
Towever 83803 RV Bumper Hitch 2 inches Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • Heavy duty constructed and black powder coated for corrosion resistance.
SaleNo. 2
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included grade-8 hardware and typically just a few tools
SaleNo. 3
TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on
  • ATTENTION: This RV Hitch Adapter is NOT Intended for RV Level Towing Purpose
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances
SaleNo. 4
Bully BBS-1102 Black Bull Series Heavy-Duty Rugged Towing Truck SUV Hitch Step Protector Universal Fit Hitch Mount for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep
  • it is widely used to gain easy access to the truck bed, luggage racks, or rear cargo area of a vehicle. Hitch steps double-up as bumper guards and can protect against damage from low impact rear-end collisions.
  • Durable Construction: the sturdy hitch step is manufactured using 16-gauge steel to withstand extreme compressions. The non-slip, high-impact rubber step pad adds to the overall strength of the access step
  • Easy Installation: use of a plug-and-play helps with quick, effortless installation. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times
  • Universal Fit: the utility bumper guard is designed to fit standard 2in. hitch mounts. This bumper guard is suitable to for most common-sized hitch receivers
  • Specifications: the access step measures 18in. wide, with a tube diameter of 3in. Heavy-duty construction makes the hitch step perfect for sports trucks and SUVs
SaleNo. 5
HITOWMFG Drop-Down Bumper 2 inch Receiver Adapter for 4x4 inch Bumper Trailer Towing Cargo Carrier Bike Racks
  • Fits 4" x 4" RV or travel trailer bumper, use for both downside and upside
  • Accepts hitch mount of 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories, could offer a low hitch mount to provide RV trailer towing
  • Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for towing purposes
  • Finished in black podwer coating provide durable and strong conditions, resist dust and corrosion, adds extra durability
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable

Conclusion

This guide is here to support you in your choice of Towing Bumper Hitches and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Towing Bumper Hitches according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-05-14 at 20:14 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment