Essential Guide of Trailer Stands – September 2021 Edition

Looking to find the best Trailer Stands?

We researched 11 Trailer Stands, tested 8, and we have done 12 hours of research. The best Trailer Stands doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
4 Reviews
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
  • Static Load Capacity: 50,000 Lbs (2 Pack)
  • Lift Capacity: 5,000 Lbs
  • Service Range: 44" - 51"
  • Wheel Diameter: No Wheel
  • Base Plate Size: 13.5" Diameter

Intro

Here’s your guide to choosing the best Trailer Stands. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Trailer Stands of different brands and prices based on the best value for money. This ranking was created to help you find the best Trailer Stands depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Trailer Stands that’s right for you!

Our picks

No. 1
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
4 Reviews
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
  • Static Load Capacity: 50,000 Lbs (2 Pack)
  • Lift Capacity: 5,000 Lbs
  • Service Range: 44" - 51"
  • Wheel Diameter: No Wheel
  • Base Plate Size: 13.5" Diameter
SaleNo. 2
Valterra A10-0900 Trailer Tongue Jack Stand - Red
  • Supports the trailer tongue without the worry of sinking into the asphalt on hot days
  • Eliminates the need to tote and store bulky wood blocks and weighs only 2 lbs.
  • Holds up to 10,000 lbs.
  • Not designed to be used with trailer jacks with wheels or casters
  • Measures 8-5/8" diameter x 8-3/8" high
No. 3
Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Wheel, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures with a Bungee, GEN 1
  • MULTI-USE: Dock N Stow Gen 1 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. capacity for any foot or post, round or square and a 2500 lb. wheel dock capacity. For RV's, Boating and Most Bumper Pulled Trailers.
  • SPACE-SAVER: Gen 1 sits directly on 2, 2.5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. *Not to be used with C channel or I-beam frames.
  • SAFETY: Gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. Drive with it safely attached to your trailer. No more climbing up into the truck looking for your block of wood, risking injury.
  • ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height.
  • DURABLE: Gen 1 is extremely durable, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow does get dirty, wipe it clean in seconds.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 12 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Trailer Stands information.
As for me, I’m very familiar with the Trailer Stands since I got it from 4 years.

Top 10

No. 1
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
4 Reviews
Mytee Products (2 Pack) Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
  • Static Load Capacity: 50,000 Lbs (2 Pack)
  • Lift Capacity: 5,000 Lbs
  • Service Range: 44" - 51"
  • Wheel Diameter: No Wheel
  • Base Plate Size: 13.5" Diameter
SaleNo. 2
Valterra A10-0900 Trailer Tongue Jack Stand - Red
  • Supports the trailer tongue without the worry of sinking into the asphalt on hot days
  • Eliminates the need to tote and store bulky wood blocks and weighs only 2 lbs.
  • Holds up to 10,000 lbs.
  • Not designed to be used with trailer jacks with wheels or casters
  • Measures 8-5/8" diameter x 8-3/8" high
No. 3
Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Wheel, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures with a Bungee, GEN 1
  • MULTI-USE: Dock N Stow Gen 1 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. capacity for any foot or post, round or square and a 2500 lb. wheel dock capacity. For RV's, Boating and Most Bumper Pulled Trailers.
  • SPACE-SAVER: Gen 1 sits directly on 2, 2.5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. *Not to be used with C channel or I-beam frames.
  • SAFETY: Gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. Drive with it safely attached to your trailer. No more climbing up into the truck looking for your block of wood, risking injury.
  • ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height.
  • DURABLE: Gen 1 is extremely durable, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow does get dirty, wipe it clean in seconds.
SaleNo. 5
Camco Olympian Aluminum Stack Jacks, Stabilize, Position And Level Your RV, Trailer Or Camper, Can Support Up to 6,000 lbs, Extends 17" - (4 Pack) (44560)
  • Stabilizes and Levels your RV: Designed to get secure and level RV positioning and stability
  • Superior Strength: Each jack supports up to 6000 pound
  • Durable Construction: Made of cast aluminum
  • Adjustable: Extends from 11 inch to 17 inch
  • Includes: Comes with a set of (4) stack jacks
No. 6
Pro Series EJ10000101 Sidewind Swivel Jack
1,002 Reviews
Pro Series EJ10000101 Sidewind Swivel Jack
  • Bolt-On Swivel Tongue Jack, 1000 lbs. capacity
  • Sturdy 6" Poly wheel, 3/8" swivel pull pin
  • Hardware included to mount up to a 3" x 5" trailer frame
  • Clear Zinc finish for corrosion protection
No. 7
RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"
  • 【What will You Get】4 Pack RV Stack Jacks come with a colorful storage bag, which are ideal for stabilizing and leveling your RV, great stabilization solution for your RV, trailer and camper, etc
  • 【Make Your RV Stable】These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with square base design, each can support up to 6000lbs, with which you needn’t to worry about your RV move or bounce anymore
  • 【Height Adjustable】The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise
  • 【Easy to Use】Simply position each stack jack stand underneath your RV, and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use
  • 【Lightweight & Portable】 These RV jack stands weight less than 40 lbs in total, and they come with a colorful organize bag; besides, when not use, they can be compact nested together for easy storage
No. 8
Pro Series 1400300303 Bolt-On Topwind Jack
  • Top wind crank designed tongue jack for agricultural and commercial use
  • Designed with a spring loaded, plunger pin swivel feature that allows you to swing jack up for travel and down for use
  • Mount fits up to a 3 x 4 inch trailer tongue
  • Ergonomic top wind handle design for easy cranking
  • Includes all necessary mounting hardware for installation
SaleNo. 9
Cynder 02047 Aluminum Stacker Stack Jacks, Stabilize, Level Your RV, Trailer Or Camper, Can Support Up to 6,000 lbs, Extends 17' (Set of 4)
570 Reviews
Cynder 02047 Aluminum Stacker Stack Jacks, Stabilize, Level Your RV, Trailer Or Camper, Can Support Up to 6,000 lbs, Extends 17" (Set of 4)
  • Textured Finish, No Sharp Edges
  • Extends 11" to 17"
  • For Stabilizing Travel Trailers, Campers, Cars, Boats, and RVs
  • Base made of Aluminum Die Cast
  • Maximum Capacity: 6, 000lbs per Stabilizing Jack
No. 10
100,000 Lb. Static Capacity Standard Duty Trailer Stabilizing Jack Stand
4 Reviews
100,000 Lb. Static Capacity Standard Duty Trailer Stabilizing Jack Stand
  • Has a removable pipe handle for quick 39-1/2" to 51" height adjustment
  • 14" base provides maximum rigidity
  • Accommodates up to a 9 degree tilt-off level
  • 100,000 lb. static capacity and 40,000 lb. lifting capacity

How we tested

We search all the field to find the best Trailer Stands and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Trailer Stands from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Trailer Stands and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Trailer Stands from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
Valterra A10-0900 Trailer Tongue Jack Stand - Red
  • Supports the trailer tongue without the worry of sinking into the asphalt on hot days
  • Eliminates the need to tote and store bulky wood blocks and weighs only 2 lbs.
  • Holds up to 10,000 lbs.
  • Not designed to be used with trailer jacks with wheels or casters
  • Measures 8-5/8" diameter x 8-3/8" high
SaleNo. 2
Camco Olympian Aluminum Stack Jacks, Stabilize, Position And Level Your RV, Trailer Or Camper, Can Support Up to 6,000 lbs, Extends 17" - (4 Pack) (44560)
  • Stabilizes and Levels your RV: Designed to get secure and level RV positioning and stability
  • Superior Strength: Each jack supports up to 6000 pound
  • Durable Construction: Made of cast aluminum
  • Adjustable: Extends from 11 inch to 17 inch
  • Includes: Comes with a set of (4) stack jacks
SaleNo. 3
Condor PS-1500 Pit-Stop/Trailer-Stop
  • This fully adjustable wheel locking system is capable of accommodating either front or rear wheels in sizes from 15-22in or 80-220 mm wide
  • The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform
  • The Pit Stop also serves as a Trailer Stop with the optional Trailer Adapter Kit, which allows quick attaching or detaching
  • Requires only one person to load or release any motorcycle and in most cases, 2 tie-down straps are required to secure the bike for transport
SaleNo. 4
NETGEAR Wi-Fi Range Extender EX3700 - Coverage Up to 1000 Sq Ft and 15 Devices with AC750 Dual Band Wireless Signal Booster & Repeater (Up to 750Mbps Speed), and Compact Wall Plug Design
  • EXTENDED WIRELESS COVERAGE: Adds Wi-Fi range coverage up to 1000 sq ft, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more.
  • AC750 WI-FI SPEED: Provides up to 750Mbps performance using dual-band and patented FastLane(TM) technology.
  • UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with Wi-Fi.
  • WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed.
  • SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols.
  • SIMPLE TO SETUP: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location.
SaleNo. 5
Billy Summers
  • Hardcover Book
  • King, Stephen (Author)
  • English (Publication Language)
  • 528 Pages - 08/03/2021 (Publication Date) - Scribner (Publisher)

Conclusion

This guide is here to support you in your choice of Trailer Stands and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Trailer Stands according to your criteria. Your comments are most welcome and they will help us improve the ranking.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-09-20 at 14:44 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment