Looking to find the best Vacuum Dust Collector Hoses?
We researched 27 Vacuum Dust Collector Hoses, tested 19, and we have done 19 hours of research. The best Vacuum Dust Collector Hoses doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.
The best
No. 1
FULTON 4" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
- Ideal for sawdust collection and fume ventilation in woodworkng applications
- Good abrasion and tear resistance
- Excellent chemical resistance
- Extremely flexible
Intro
Here’s your guide to choosing the best Vacuum Dust Collector Hoses. As there is a great number of models with varying prices, you may find it difficult to figure out which one is right for you. For this reason, we decided to make a top 10 of the Vacuum Dust Collector Hoses of different brands and prices based on the best value for money. This ranking was created to help you find the best Vacuum Dust Collector Hoses depending on your needs and budgets. Our selection criteria are provided to give you a complete picture of the items offered. Get ready to find the Vacuum Dust Collector Hoses that’s right for you!
Our picks
No. 1
FULTON 4" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
- Ideal for sawdust collection and fume ventilation in woodworkng applications
- Good abrasion and tear resistance
- Excellent chemical resistance
- Extremely flexible
SaleNo. 2
POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) | Flexible Clear Vue Heavy Duty PVC Hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear Vue dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications
- Includes (one) clear flexible hose - 20 feet long 4" Diameter
SaleNo. 3
2 1/2" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW368
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
Why you should trust us
This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 19 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Vacuum Dust Collector Hoses information.
As for me, I’m very familiar with the Vacuum Dust Collector Hoses since I got it from 2 years.
Top 10
No. 1
FULTON 4" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
- Ideal for sawdust collection and fume ventilation in woodworkng applications
- Good abrasion and tear resistance
- Excellent chemical resistance
- Extremely flexible
SaleNo. 2
POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) | Flexible Clear Vue Heavy Duty PVC Hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear Vue dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications
- Includes (one) clear flexible hose - 20 feet long 4" Diameter
SaleNo. 3
2 1/2" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW368
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
No. 4
POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers
- INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter
- APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris
- VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools
- Compatibility: Fits in vacuum ports that the O.D is 1-1/2", I.D is 2-1/4" or 2-1/2", and connects to the dust extraction ports of power tools that the O.D is 1"
- DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter 2-1/2" O.D | ABS vacuum dust hose adapter 2-1/4" O.D | Small pliable plastic fitting 1" I.D | Large pliable plastic fitting 1-1/2" I.D
SaleNo. 5
Dust Collection Power Tool Hose with Fittings For Use With Smaller Power Tools Shop Vacuums Dust Collectors and General Home Use
- Our small 1-3/16" O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
- The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
- Included inside the box: 1 each ten foot long 1-3/16" O.D. small flexible hose, 1 each small flexible rubber screw on fitting, 1 each large flexible rubber screw on fitting and 1 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac's.
- The small screw on rubber fitting has a 1" I.D. with a 1-3/16" taper up to 1-1/4" O.D. , the large screw on rubber fitting has a 1-1/2" I.D. with a 1-25/32" O.D. The vacuum adapter has a 2-1/4" taper up to 2-5/16" O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
- PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.
No. 6
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
- When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
No. 7
FULTON 2-1/2" x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
- MADE IN USA!
- Super flexible hose for maneuvering around all your shop machinery
- Clear Vue to see any type of obstruction
- Reinforced PVC with a wire helix
- Ideal for sawdust collection
No. 8
POWERTEC 70108 4-Inch Blast Gate for Dust Collector/Vacuum Fittings
- Includes: 4” Blast Gate; Both ends have 4” OD outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports
- Specifications: Accepts 4” ID dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64” O.D. and 3-3/4” I.D
- Compatibility: Will not connect directly to other 4” OD ports; please confirm that the actual listed size fits your application before ordering. If connecting to a 4” OD port, a Flex Cuff or similar device will be required
- Function: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another
- Quality: Made with premium black ABS plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear & tear from dirt, sawdust and woodchips
No. 9
Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery
- The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!
- One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.
- This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more.
- Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
- Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.
No. 10
POWERTEC 70136 4-Inch to 2-1/2 Inch Cone Reducer
- INCLUDES: 4” to 2 1/2” Dust Collection Hose Reducer
- FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line
- PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs)
- PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection
- DIMENSIONS: 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID
How we tested
We search all the field to find the best Vacuum Dust Collector Hoses and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Vacuum Dust Collector Hoses from the good.
- Easy To use
- Options
- Quality
- Longevity
How we picked
We search for all the field to find the best Vacuum Dust Collector Hoses and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Vacuum Dust Collector Hoses from the good.
- Price
- Easy To use
- Customer reviews
- Quality
- Longevity
- Dimensions
Current Offers
SaleNo. 1
2 1/2" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW368
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
SaleNo. 2
POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) | Flexible Clear Vue Heavy Duty PVC Hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear Vue dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications
- Includes (one) clear flexible hose - 20 feet long 4" Diameter
SaleNo. 3
Dust Collection Power Tool Hose with Fittings For Use With Smaller Power Tools Shop Vacuums Dust Collectors and General Home Use
- Our small 1-3/16" O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
- The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
- Included inside the box: 1 each ten foot long 1-3/16" O.D. small flexible hose, 1 each small flexible rubber screw on fitting, 1 each large flexible rubber screw on fitting and 1 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac's.
- The small screw on rubber fitting has a 1" I.D. with a 1-3/16" taper up to 1-1/4" O.D. , the large screw on rubber fitting has a 1-1/2" I.D. with a 1-25/32" O.D. The vacuum adapter has a 2-1/4" taper up to 2-5/16" O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
- PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.
SaleNo. 4
Cen-Tec Systems 94709 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection, Silver
- 1-1/4" diameter x 16-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection
- The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
- Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
- Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric
- The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection
- Expanded version of Cen-Tec's popular 94192 dust collection hose with additional ¾”, 1-1/4” power tool adapters, and additional 2 ½" shop vacuum adapter
- The inner collar and extra-durable acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1-3/4" on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
- Additional 2 ½" cuff mounted on a bayonet allows the operator to use dust collection workstations with home shop vacuums popular with table saws
- The soft TPE of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool
- The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum
SaleNo. 5
4" x 10' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW375
- The pvc hose is wrapped around a steel wire that can easily be grounded
- Tight bending radius allows you to maneuver the hose anywhere in your shop
- This heavy duty hose will not collapse under pressure from your dust collector
- Hose is clear so you can see directly inside to spot any kind of obstruction
- Hose is made in USA
Conclusion
This guide is here to support you in your choice of Vacuum Dust Collector Hoses and is regularly updated so that you can make an informed selection. Nowadays, it’s not that easy to know about each and every product that’s on the market. So we hope that this comparison was able to help you with choosing the best Vacuum Dust Collector Hoses according to your criteria. Your comments are most welcome and they will help us improve the ranking.
Click to rate this post!
[Total: 0 Average: 0]Last update on 2021-04-18 at 08:24 / Affiliate links / Images from Amazon Product Advertising API